User Manual

6 iQ Brackets Quick Start Guide 7
iQ15-WB Mounting Options
CEILING MOUNTED WALL MOUNTED
iQ12-WB Mounting Options
CEILING MOUNTED WALL MOUNTED
Step 1: Secure Yoke Spacers
ITEM DESCRIPTION QUANTITY
1 Yoke spacer 2
2
M5 x 25 mm screw with nylon thread
locking
4
Step 2: Assemble Steel Yoke Bracket
ITEM DESCRIPTION QUANTITY
1 Steel yoke bracket 1 1
2 Steel yoke bracket 2 1
3 Steel yoke bracket 3 1
4 M6 plain washer 6
5 M6 x 16 mm screw 6
6 M6 nylon locking nut 6
Step 3: Place Speaker Into Yoke Bracket
ITEM DESCRIPTION QUANTITY
1 Steel yoke bracket assembly 1
2 M8 x 25 mm screw 2
3 M8 plain washer 2
4 M8 spring lock washer 2
IMPORTANT NOTE: The mounting of a permanently installed sound system may be dangerous unless undertaken by quali ed personnel with the required experience and
certi cation to perform the necessary tasks. Walls,  oors or ceilings must be capable of safely and securely supporting the actual load. Themounting accessory used must be
safely and securely  xed both to the loudspeaker and to the wall,  oor or ceiling.
When mounting rigging components on walls,  oors or ceilings, ensure that all  xings and fasteners used are of an appropriate size and load rating. Wall and ceiling
claddings, and the construction and composition of walls and ceilings, all need to be taken into account when determining whether a particular  xing arrangement can be
safely employed for a particular load. Cavity plugs or other specialist  xings, if required, must be of an appropriate type, and must be  tted and used in accordance with the
maker’sinstructions. When suspending the components a secondary safety method should be used in accordance with local laws and standards.
The operation of your speaker cabinet as part of a  own system, if installed incorrectly and improperly, canpotentially expose persons to serious health risks and
even death. In addition, please ensure that electrical, mechanical and acoustic considerations are discussed with quali ed and certi ed (by local state or national
authorities) personnel prior to any installation or  ying.
Make sure that speaker cabinets are set up and  own by quali ed and certi ed personnel only, using dedicated equipment and original parts and components
delivered with the unit. If any parts or components are missing please contact your Dealer before attempting to set up the system.
Be sure to observe the local, state and other safety regulations applicable in your country. MUSIC Group, including the MUSIC Group companies listed on the enclosed
“Service Information Sheet”, assumes no liability for any damage or personal injury resulting from improper use, installation or operation of the product. Regular
checks must be conducted by quali ed personnel to ensure that the system remains in a secure and stable condition. Make sure that, where the speaker is  own,
the area underneath the speaker is free of human tra c. Do not  y the speaker in areas that can be entered or used by members of the public.
Speakers create a magnetic  eld, even if not in operation. Therefore, please keep all materials that can be a ected by such  elds (discs, computers, monitors, etc) at a
safe distance. A safe distance is usually between 1 and 2 metres.
iQ15-WB Yoke Mounting
iQ15-WB YOKE HORIZONTAL MOUNTING iQ15-WB YOKE VERTICAL MOUNTING
1
3
2
1
3
2