User Guide

General Specication
Loudspeaker diameter 261 mm / 10"
Impedance 8 Ω
Continuous power rating
1
300 W
Peak power rating
2
1200 W
Sensitivity 93 dB (±3 dB, 1 W / 1 m)
Frequency range Fo ~4 kHz (-10 dB)
Magnet size 156 mm
Voice coil diameter 65.5 mm / 2.5"
Bobbin material Glass ber SV
Wire type PISV wire
Winding height 17 mm
Layers 2
Cone body Paper
Cone surround Cloth
Item part number H77-00002-31669
Notes to Specication
1 Pink noise with 6 dB crest factor for 2 hours
2 Peak power is dened as continuous power +6 dB
Thiele & Small Parameters
Resonance frequency (Fs) 53 Hz
DC resistance (Re) 7.8 Ω
Mechanical Q factor (Qms) 7.45
Electrical Q factor (Qes) 0.44
Total Q factor (Qts) 0.41
Mechanical moving mass (Mms) 47.8 g
Mechanical compliance (Cms) 0.19 Mm/N
Force factor (Bl) 16.9
Equivalent acoustic volume (Vas) 31.6 I
Maximum linear displacement (Xmax) 3.4 Mm
Diaphragm area (Sd) 346 Sq cm
Voice coil inductance @ 1 kHz (Le) 0.8 mH
Shipping Information
Net weight 4.5 kg / 9.9 lbs
Shipping weight 5.1 kg (11.2 lbs)
Specication Sheet
300 Watt 10" Low Frequency Loudspeaker
for PA Applications
TS-10W300/8A
Music Tribe accepts no liability for any loss which may be suered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specications, appearances and other information are subject to
change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Auratone and Coolaudio are trademarks or registered trademarks of
Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2019 All rights reserved.
Application
This loudspeaker is exclusively meant for the reproduction of audio
signals according to instructions and specications given in this
manual. We‘re not liable for any damage caused by unintended use.