Quick Start Guide

10
iNSPIRE iP82/iP15B/iP12B Quick Start Guide
11
iP DSP Menu Structure
Menu Sub-Menu Fullrange Function
Main Screen
Displays level indicators and model name.
Displays the following Bluetooth
status information:
• • Bluetooth symbol indicates
connection to audio and remote
control device (iPhone, etc.).
• • “M” or “S” below the Bluetooth
symbol indicate that the speaker
is linked to another iP speaker as
MASTER (left channel, “M”) or SLAVE
(right channel, “S”).
Rotate the encoder knob to adjust the
output volume.
Press the encoder knob to enter the
PROCESS menu.
Volume
Rotate the encoder to change the
output volume.
MODE
Selects from 4 preset equalisations,
depending on function and music type.
INPUT
Sets input mixer gain for analogue
input A and B, Bluetooth, as well as
Mono on/off setting.
EQ
(Equalisation)
Allows adjustment of three band equaliser
control, bass, midrange and treble.
POSIT.
(Position)
Selects DSP compensation depending on
the speaker position: corner, wall or fl oor.
BT
(Bluetooth)
Lets you pair the speaker with mobile
Bluetooth devices and link to another
iP speaker as master / slave.
SUBWOOFER
Allows control of subwoofer relative level.
SETUP
Sets LCD back panel contrast, device lock
and factory reset.
INFO
Displays model and fi rmware information.
*iPhone and iPad are trademarks of Apple Inc. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of
such marks is under license. Android is a trademark of Google Inc. Windows is either a registered trademark or trademark of Microsoft Corporation in the
United States and/or other countries.
iP Series Analogue Connection
Despite their sophistication, iP speakers offer straightforward analogue connectivity, and you can easily
arrange the iP system to allow simple control of levels from other devices, such as mixers. You can also
daisy-chain multiple iP speakers using only the analogue connections, and then directly control the overall
level from your mixer’s master fader.
For typical operation using the iP speakers as a 2.1 subwoofer / satellite system, make all connections using
the following procedure:
1. Set the DSP volume and input gain settings on the iP speaker to a fl at “0 dB” setting.
2. Connect the mixer’s left stereo output to the iP subwoofer’s analogue INPUT A
3. Connect the mixer’s right stereo output to the iP subwoofer’s analogue INPUT B.
4. Connect the subwoofer’s OUTPUT A to the left iP82’s INPUT connection.
5. Connect the subwoofer’s OUTPUT B output to the right iP82’s INPUT connection.
6. Using the DSP control panel on the speaker, set your desired OUTPUT levels and EQ curves.
If you wish to deploy your speakers in a left-right stereo confi guration with dual subwoofers,
use this procedure:
1. Set the DSP volume and input gain settings on all of the iP speakers to a fl at “0 dB” setting.
2. Select “Mono: On” from the DSP submenu of both subwoofers. The “Mono” setting will sum each
subwoofer’s analogue inputs before sending the combined signal out to that subwoofer’s respective
satellite speaker(s).
3. Connect the mixer’s left stereo output to the left iP subwoofer’s analogue INPUT A.
4. Connect the left subwoofer’s OUTPUT A to the iP82 satellite speaker’s INPUT connection. (If you have
an additional satellite speaker, you can use the subwoofer’s OUTPUT B to send an identical signal to the
extra speaker.)
5. Connect the mixer’s right stereo output to the right iP subwoofer’s analogue INPUT A.
6. Connect the right subwoofer’s OUTPUT A and/or OUTPUT B to the right channel satellite speakers.
7. Using the DSP control panel on each speaker, set your desired OUTPUT levels and EQ curves.
iP Series Bluetooth Instructions
Bluetooth Connection
To play audio from a Bluetooth-enabled device, you will need at least one iP speaker and an iPad*/
iPhone*/Android*/Windows* device with basic Bluetooth connectivity. With a basic Bluetooth connection,
all related iP DSP functions must still be controlled directly from the iP rear panel via the rotary encoder.
For Apple iOS devices, you can also download a dedicated TURBOSOUND iP Bluetooth app from the
Apple App Store. This iP Bluetooth app allows you to control a single or stereo pair of iP speakers,
including all DSP functions, remotely from your iOS device (see “Bluetooth Control” below for
more information).
Bluetooth Streaming
To stream Bluetooth audio with any Bluetooth device (iPad/iPhone/Android/Windows, etc.)
Single subwoofer operation
1. Enable Bluetooth on your remote device.
2. Switch on your iP speaker and minimize the volume.
3. Select “Pair device” from the iP speaker’s Bluetooth menu.
4. Check that your remote device is searching for a connection.
5. Once your device detects the iP speaker, select the iP speaker from your remote device’s menu
(e.g., “TURBOSOUND iP15B”).
6. Wait until the remote device shows an active connection, and then check the speaker’s Bluetooth menu,
which should display the name of the remote device (e.g., “HUAWEI P7-L07”).