User Manual

12 13
iNSPIRE iP82/iP15B/iP12B Quick Start Guide
Main Page (1 speaker) Main Page (2 speakers linked) Settings Page
8. WAIT for the speakers to link.
9. Once the linking process is complete, Bluetooth audio will stream to the two speakers. The MASTER speaker will receive the left channel, and the SLAVE speaker will
receive the right channel.
10. MASTER and SLAVE connection will
be indicated on the main, top-level DSP screens.
Channel Routing for Audio Streaming
A dedicated iOS control app for TURBOSOUND Bluetooth speakers can be downloaded from the AppleStore.
Subwoofer Satellite Output 1 Satellite Output 2
1 Speaker connected Mono combination: left + right Left Channel of streamed signal Right channel of streamed signal
2 Speakers connected
Master Speaker
Left channel Left channel Left channel
2 Speakers connected
Mono selected
Both Speakers
Mono Left + Right Mono Left + Right Mono Left + Right
2 Speakers connected
Slave Speaker
Right channel Right channel
Right channel
Bluetooth Control
A dedicated iOS control app for TURBOSOUND Bluetooth speakers can be downloaded from the AppleStore.
• In both mono and stereo mode,  rst pair the MASTER speaker, and then launch the iOS control app.
• The iOS control app will automatically detect and adapt for mono or stereo mode.
• To alter the speaker settings, swipe the screen or press the settings icon. All iP speaker settings can be accessed from the iOS control app.
IMPORTANT NOTE: The mounting of a permanently installed sound system may be dangerous unless undertaken by quali ed personnel with the required experience and
certi cation to perform the necessary tasks. Walls,  oors or ceilings must be capable of safely and securely supporting the actual load. Themounting accessory used must be
safely and securely  xed both to the loudspeaker and to the wall,  oor or ceiling.
When mounting rigging components on walls,  oors or ceilings, ensure that all  xings and fasteners used are of an appropriate size and load rating. Wall and ceiling
claddings, and the construction and composition of walls and ceilings, all need to be taken into account when determining whether a particular  xing arrangement can be
safely employed for a particular load. Cavity plugs or other specialist  xings, if required, must be of an appropriate type, and must be  tted and used in accordance with the
maker’sinstructions.
The operation of your speaker cabinet as part of a  own system, if installed incorrectly and improperly, canpotentially expose persons to serious health risks and
even death. In addition, please ensure that electrical, mechanical and acoustic considerations are discussed with quali ed and certi ed (by local state or national
authorities) personnel prior to any installation or  ying.
Make sure that speaker cabinets are set up and  own by quali ed and certi ed personnel only, usingdedicated equipment and original parts and components
delivered with the unit. If any parts or components are missing please contact your Dealer before attempting to set up the system.
Be sure to observe the local, state and other safety regulations applicable in your country. MUSIC Group, including the MUSIC Group companies listed on the enclosed
“Service Information Sheet”, assumes no liability for any damage or personal injury resulting from improper use, installation or operation of the product. Regular
checks must be conducted by quali ed personnel to ensure that the system remains in a secure and stable condition. Make sure that, where the speaker is  own, the
area underneath the speaker is free of human tra c. Do not  y the speaker in areas that can be entered or used by members of the public.
Speakers create a magnetic  eld, even if not in operation. Therefore, please keep all materials that can be a ected by such  elds (discs, computers, monitors, etc) at a
safe distance. A safe distance is usually between 1 and 2 metres.