Quick start guide

18
iQ series Quick Start Guide
19
Technical Specifi cations
iQ8 iQ10 iQ12
System
Frequency response
60 Hz – 18 kHz ±3 dB
55 Hz – 20 kHz -10 dB
55 Hz – 18 kHz ±3 dB
50 Hz – 20 kHz -10 dB
52 Hz – 18 kHz ±3 dB
45 Hz – 20 kHz -10 dB
Nominal dispersion
90° H x 90° V @ -6 dB points 90° H x 60° V @ -6 dB points 80° H x 60° V @ -6 dB points
Maximum SPL
128 dB peak 129 dB peak 130 dB peak
Crossover type
Active Active Active
Transducers
1 x 8" (208 mm) LF driver
1 x 1" (25.4 mm)
HF compression driver
1 x 10" (256 mm) LF driver
1 x 1" (25.4 mm)
HF compression driver
1 x 12" (308.5 mm) LF driver
1 x 1" (25.4 mm)
HF compression driver
Limiter
Independent HF, LF,
peak and rms
Independent HF, LF,
peak and rms
Independent HF, LF,
peak and rms
Amplifi er
Maximum output power*
2,500 W 2,500 W 2,500 W
Type
Class-D Class-D Class-D
Protection
Short circuit, open circuit, thermal Short circuit, open circuit, thermal Short circuit, open circuit, thermal
Connectors
Input A / B
2 x combo jack/XLR 2 x combo jack/XLR 2 x combo jack/XLR
Sensitivity
Line +4 dBu, mic -22 dBu,
switchable
Line +4 dBu, mic -22 dBu,
switchable
Line +4 dBu, mic -22 dBu,
switchable
Input impedance 20 kΩ unbalanced, 40 kΩ balanced 20 kΩ unbalanced, 40 kΩ balanced 20 kΩ unbalanced, 40 kΩ balanced
Maximum input level +21 dBu +21 dBu +21 dBu
Output A / B
2 x XLR Linked to input 2 x XLR Linked to input 2 x XLR Linked to input
Mix output
XLR, balanced XLR, balanced XLR, balanced
Output impedance 100 Ω unbalanced, 200 Ω balanced 100 Ω unbalanced, 200 Ω balanced 100 Ω unbalanced, 200 Ω balanced
Ultranet input/link
2 x RJ45 2 x RJ45 2 x RJ45
Mains Supply
Neutrik powerCON input 20A
and link 15A
Neutrik powerCON input 20A
and link 15A
Neutrik powerCON input 20A
and link 15A
Controls
DSP
Rotary push-encoder
Buttons for PROCESS, SETUP,
EXIT, ENTER
Rotary push-encoder
Buttons for PROCESS, SETUP,
EXIT, ENTER
Rotary push-encoder
Buttons for PROCESS, SETUP,
EXIT, ENTER
Mixer section
2 x gain controls
(channels A and B)
2 x Line/Mic switch
2 x gain controls
(channels A and B)
2 x Line/Mic switch
2 x gain controls
(channels A and B)
2 x Line/Mic switch
User DSP Functions
Factory EQ presets
Positioning, Sound mode,
Sound Modeling, FBQ
Positioning, Sound mode,
Sound Modeling, FBQ
Positioning, Sound mode,
Sound Modeling, FBQ
Display
LCD 128 x 32, blue backlit LCD 128 x 32, blue backlit LCD 128 x 32, blue backlit
Delay
0 - 300 ms 0 - 300 ms 0 - 300 ms
Equalisation
High and low shelving EQ
2 x parametric EQ
High and low shelving EQ
2 x parametric EQ
High and low shelving EQ
2 x parametric EQ
Limiter
Zero attack input limiter Zero attack input limiter Zero attack input limiter
Presets
20 total presets, 19 user-defi nable 20 total presets, 19 user-defi nable 20 total presets, 19 user-defi nable
Crossover
High Pass L-R 24 dB/oct High Pass L-R 24 dB/oct High Pass L-R 24 dB/oct
Protection
Lock-out function for all settings Lock-out function for all settings Lock-out function for all settings
iQ8 iQ10 iQ12
Ultranet Digital Network
System
Signal
Latency
16 channels
< 0.9 ms
16 channels
< 0.9 ms
16 channels
< 0.9 ms
Cabling
Cables
Cable length
Shielded CAT5
max. 246 ft / 75 m recommended
Shielded CAT5
max. 246 ft / 75 m recommended
Shielded CAT5
max. 246 ft / 75 m recommended
Power Supply
Power consumption
150 W @
1
/
8
max power 150 W @
1
/
8
max power 150 W @
1
/
8
max power
Voltage (fuses)
USA / Canada 120 V~, 60 Hz (T 15 A H 250 V) 120 V~, 60 Hz (T 15 A H 250 V) 120 V~, 60 Hz (T 15 A H 250 V)
UK / Australia / Europe
220-240 V~, 50/60 Hz
(T 10 A H 250 V)
220-240 V~, 50/60 Hz
(T 10 A H 250 V)
220-240 V~, 50/60 Hz
(T 10 A H 250 V)
Korea / China
220-240 V~, 50/60 Hz
(T 10 A H 250 V)
220-240 V~, 50/60 Hz
(T 10 A H 250 V)
220-240 V~, 50/60 Hz
(T 10 A H 250 V)
Japan 100 V~, 50/60 Hz (T 15 A H 250 V) 100 V~, 50/60 Hz (T 15 A H 250 V) 100 V~, 50/60 Hz (T 15 A H 250 V)
Enclosure
Dimensions HWD
457 x 279 x 279 mm
(18.0 x 11.0 x 11.0")
526 x 324 x 316 mm
(20.7 x 12.7 x 12.4")
609 x 370 x 370 mm
(24.0 x 14.5 x 14.5")
Net weight
14.7 kg (32 lbs) 17.2 kg (38 lbs) 21.1 kg (46 lbs)
Construction
Injection-moulded
polypropylene enclosure
Injection-moulded
polypropylene enclosure
Injection-moulded
polypropylene enclosure
Finish
Black painted Black painted Black painted
Grille
Powder coated perforated steel Powder coated perforated steel Powder coated perforated steel
Flying hardware
M10 x 3 points M10 x 3 points M10 x 3 points
Accessories
IQ8-WB Steel wall bracket IQ10-WB Steel wall bracket IQ12-WB Steel wall bracket