Quick start guide

20
iQ series Quick Start Guide
21
iQ15 iQ15B iQ18B
System
Frequency response
50 Hz – 18 kHz ±3 dB
42 Hz – 20 kHz -10 dB
50 Hz – 130 Hz ±3 dB
40 Hz – 130 Hz -10 dB
50 Hz – 100 Hz ±3 dB
36 Hz – 100 Hz -10 dB
Nominal dispersion
75° H x 55° V @ -6 dB points Half Space Half Space
Maximum SPL
132 dB peak 130 dB peak 132 dB peak
Crossover type
Active Active Active
Transducers
1 x 1" (387 mm) LF driver
1 x 1" (25.4 mm)
HF compression driver
1 x 15" (385.7 mm) LF driver 1 x 18" (460 mm) LF driver
Limiter
Independent HF, LF,
peak and rms
Peak and rms Peak and rms
Amplifi er
Maximum output power*
2,500 W 3,000 W 3,000 W
Type
Class-D Class-D Class-D
Protection
Short circuit, open circuit, thermal Short circuit, open circuit, thermal Short circuit, open circuit, thermal
Connectors
Input A / B
2 x combo jack/XLR 2 x combo jack/XLR 2 x combo jack/XLR
Sensitivity
Line +4 dBu, mic -22 dBu,
switchable
Line +4 dBu Line +4 dBu
Input impedance 20 kΩ unbalanced, 40 kΩ balanced 20 kΩ unbalanced, 40 kΩ balanced 20 kΩ unbalanced, 40 kΩ balanced
Maximum input level +21 dBu +21 dBu +21 dBu
Output A / B
2 x XLR Linked to input 2 x XLR Linked to input 2 x XLR Linked to input
Mix output
XLR, balanced N/A N/A
Output impedance 100 Ω unbalanced, 200 Ω balanced N/A N/A
Ultranet input/link
2 x RJ45 2 x RJ45 2 x RJ45
Mains Supply
Neutrik powerCON input 20A
and link 15A
Neutrik powerCON input 20A
and link 15A
Neutrik powerCON input 20A
and link 15A
Controls
DSP
Rotary push-encoder
Buttons for PROCESS, SETUP,
EXIT, ENTER
Rotary push-encoder
Buttons for PROCESS, SETUP,
EXIT, ENTER
Rotary push-encoder
Buttons for PROCESS, SETUP,
EXIT, ENTER
Mixer section
2 x gain controls
(channels A and B)
2 x Line/Mic switch
1 x gain controls
(channels A and B)
2 x Line
1 x gain controls
(channels A and B)
2 x Line
User DSP Functions
Factory EQ presets
Positioning, Sound mode,
Sound Modeling, FBQ
Positioning, Sound mode,
Sound Modeling, FBQ
Positioning, Sound mode,
Sound Modeling, FBQ
Display
LCD 128 x 32, blue backlit LCD 128 x 32, blue backlit LCD 128 x 32, blue backlit
Delay
0 - 300 ms 0 - 300 ms 0 - 300 ms
Equalisation
High and low shelving EQ
2 x parametric EQ
High and low shelving EQ
2 x parametric EQ
High and low shelving EQ
2 x parametric EQ
Limiter
Zero attack input limiter Zero attack input limiter Zero attack input limiter
Presets
20 total presets, 19 user-defi nable 20 total presets, 19 user-defi nable 20 total presets, 19 user-defi nable
Crossover
High Pass L-R 24 dB/oct Low Pass L-R 24 dB/oct Low Pass L-R 24 dB/oct
Protection
Lock-out function for all settings Lock-out function for all settings Lock-out function for all settings
Technical Specifi cations
iQ15 iQ15B iQ18B
Ultranet Digital Network
System
Signal
Latency
16 channels
< 0.9 ms
16 channels
< 0.9 ms
16 channels
< 0.9 ms
Cabling
Cables
Cable length
Shielded CAT5
max. 246 ft / 75 m recommended
Shielded CAT5
max. 246 ft / 75 m recommended
Shielded CAT5
max. 246 ft / 75 m recommended
Power Supply
Power consumption
150 W @
1
/
8
max power 200 W @
1
/
8
max power 200 W @
1
/
8
max power
Voltage (fuses)
USA / Canada 120 V~, 60 Hz (T 15 A H 250 V) 120 V~, 60 Hz (T 15 A H 250 V) 120 V~, 60 Hz (T 15 A H 250 V)
UK / Australia / Europe
220-240 V~, 50/60 Hz
(T 10 A H 250 V)
220-240 V~, 50/60 Hz
(T 10 A H 250 V)
220-240 V~, 50/60 Hz
(T 10 A H 250 V)
Korea / China
220-240 V~, 50/60 Hz
(T 10 A H 250 V)
220-240 V~, 50/60 Hz
(T 10 A H 250 V)
220-240 V~, 50/60 Hz
(T 10 A H 250 V)
Japan 100 V~, 50/60 Hz (T 15 A H 250 V) 100 V~, 50/60 Hz (T 15 A H 250 V) 100 V~, 50/60 Hz (T 15 A H 250 V)
Enclosure
Dimensions HWD
711 x 450 x 381 mm
(27.9 x 17.7 x 15.0")
602 x 445 x 495 mm
(23.7 x 17.5 x 19.5")
691 x 533 x 559 mm
(27.2 x 21.0 x 22.0")
Net weight
26.1 kg (57 lbs) 30.6 kg (67 lbs) 39.8 kg (87.5 lbs)
Construction
Injection-moulded
polypropylene enclosure
Birch plywood, screwed,
and glued
Birch plywood, screwed,
and glued
Finish
Black painted Black painted Black painted
Grille
Powder coated perforated steel Powder coated perforated steel Powder coated perforated steel
Flying hardware
M10 x 3 points N/A N/A
Accessories
IQ15-WB Steel wall bracket
*independent of limiters and driver protection circuits