User Manual

iX series Quick Start Guide

5. The SLAVE speaker will display “Slave linking...”

6. Select “Link speaker” from the MASTER speaker’s Bluetooth menu.

7. The MASTER speaker will display “Master Linking…”

8. WAIT for the speakers to link.

9. Once the linking process is complete, Bluetooth audio will stream to the two speakers. The MASTER

speaker will receive the left channel, and the SLAVE speaker will receive the right channel.

10. MASTER and SLAVE connection will be indicated on the main, top-level DSP screens.

NOTE: These Bluetooth speakers can only link with another speaker of the same model

(e.g., an iX 12 speaker can only be paired with another iX 12 speaker).

Bluetooth Control

A dedicated iOS control app for iX speakers can be downloaded from the Apple Store.

• • In both mono and stereo mode, ﬁ rst pair the MASTER speaker, and then launch the iOS control app.

• • The iOS control app will automatically detect and adapt for mono or stereo mode.

• • To alter the speaker settings, swipe the screen or press the settings icon. All iX speaker settings can be

accessed from the iOS control app.

Main Page (1 speaker) Main Page (2 speakers linked) Settings/EQ Page

IMPORTANT NOTE: The mounting of a permanently installed sound system may be dangerous unless

undertaken by qualiﬁ ed personnel with the required experience and certiﬁ cation to perform the necessary

tasks. Walls, ﬂ oors or ceilings must be capable of safely and securely supporting the actual load. The mounting

accessory used must be safely and securely ﬁ xed both to the loudspeaker and to the wall, ﬂ oor or ceiling.

When mounting rigging components on walls, ﬂ oors or ceilings, ensure that all ﬁ xings and fasteners used

are of an appropriate size and load rating. Wall and ceiling claddings, and the construction and composition

of walls and ceilings, all need to be taken into account when determining whether a particular ﬁ xing

arrangement can be safely employed for a particular load. Cavity plugs or other specialist ﬁ xings, if required,

must be of an appropriate type, and must be ﬁ tted and used in accordance with the maker’s instructions.

The operation of your speaker cabinet as part of a ﬂ own system, if installed incorrectly and improperly,

can potentially expose persons to serious health risks and even death. In addition, please ensure that

electrical, mechanical and acoustic considerations are discussed with qualiﬁ ed and certiﬁ ed (by local state

or national authorities) personnel prior to any installation or ﬂ ying.

Make sure that speaker cabinets are set up and ﬂ own by qualiﬁ ed and certiﬁ ed personnel only, using

dedicated equipment and original parts and components delivered with the unit. If any parts or

components are missing please contact your Dealer before attempting to set up the system.

Be sure to observe the local, state and other safety regulations applicable in your country. MUSIC Group,

including the MUSIC Group companies listed on the enclosed “Service Information Sheet”, assumes no

liability for any damage or personal injury resulting from improper use, installation or operation of the

product. Regular checks must be conducted by qualiﬁ ed personnel to ensure that the system remains in a

secure and stable condition. Make sure that, where the speaker is ﬂ own, the area underneath the speaker is

free of human trafﬁ c. Do not ﬂ y the speaker in areas that can be entered or used by members of the public.

Speakers create a magnetic ﬁ eld, even if not in operation. Therefore, please keep all materials that can

be affected by such ﬁ elds (discs, computers, monitors, etc) at a safe distance. A safe distance is usually

between 1 and 2 metres.