USER MANUAL Loudspeaker Management System LMS-D24, LMS-D26, LMS-D6

user manual
TA-890
TA-890 user manual
Page 92
Do not work with enclosures with damaged paintwork especially for outdoor use. Due to the
nature of modern touring these enclosures can be exposed to moisture. Untreated and
exposed woodwork will absorb water. Aspect enclosures are screwed and glued together to
prevent any serious structural damage due to water absorption. However increased exposure
will cause the bond between wood and the paint to fail, at which stage it will be necessary to
sand back the enclosure to bare wood and repaint to ensure long-term protection.
There are three simple ways to help maintain the longevity of your Turbosound Aspect 890
series enclosures:
The majority of paintwork damage is mostly caused during transportation and flying of the
systems. For large scale touring Turbosound recommends using the four-high WB-8904 and
WB-8904T wheelboards and stabiliser trucks. This inherently protects the enclosures against
impact protected by the feet, flying hardware and securing strap.
Due to the weight of a fully loaded wheelboard it is essential that adequate protection is
provided in the truck, BARS SHOULD BE USED TO ENSURE THE SYSTEM CANNOT MOVE
DURING TRANSIT.
Turbosound supplies heavy duty transit covers to help protect against long term damage
during transit (see page 14). drawings are available from Turbosound which will enable you
to have covers manufactured locally should you prefer.