User Manual

2 of 8
Product Information Document
Portable Speakers
1100 Watt 2 Way
12" Full Range Powered Loudspeaker with
KLARK TEKNIK DSP Technology for
Portable PA and Installation Applications
MILAN
M12
The two discrete input channels are each equipped with balanced, combination jack/XLR connectors and a level control, catering for a range
of music sources from low impedance microphones, acoustic guitars and keyboards to mp3 players and mixing consoles, selectable via a mic/
line slide switch.
Common to both channels are bass and treble controls with ±6dB of cut or boost to allow the loudspeaker to be equalised to the venue. In
addition, a low cut  lter is provided at 100Hz to shelve the low frequency response when used on the  oor as a wedge monitor, or to ensure
correct integration with subwoofers. A speech/music switch optimises the loudspeaker’s frequency response either for predominantly vocal
material or for music programme. A Mix Out function sends the mix of both input channels post-EQ to additional MILAN loudspeakers on a
balanced male XLR for easy system expansion.
The trapezoidal enclosure is fabricated from high density polypropylene, and is extensively ribbed externally and internally to eliminate resonances
and also to provide an attractive and durable cabinet  nish. The symmetrical side angles allow the loudspeaker to be conveniently used as a
 oor monitor. A recessed grab handle on the top is designed for easy lifting and carrying, while the dual angle pole mount socket allows the
loudspeaker to be mounted on straight poles or speaker stands either vertically, orraise higher and angled down to optimise audience coverage.
A total of six M10 rigging points are provided on the top and bottom of the cabinet to enable vertical or horizontal suspension in permanent
installations using M10shouldereyebolts.
Mains power is connected via a non-locking IEC receptacle with integrated fuseholder. The illuminated front badge can operate in one of three
possible modes: permanently on; permanently o ; or to indicate the action of limiting.
Rigging
The MILAN M12 loudspeaker can be wall mounted using the PB-55 universal wall bracket with the built in pole mount socket.
It can also be suspended in permanent installations using shoulder eyebolts attached to the M10 rigging points provided on the top and bottom
of the cabinet. The loudspeaker can be oriented either vertically or horizontally to suit the available venue space.