Manual

32 MANCHESTER SERIES Rigging Manual
Chapter 4: Assembling MS215 Subwoofers on a MAN-FG Fly Grid
4.0.1 Required Components
Item Quantity
MAN-FG Fly Grid 1
MS215 Subwoofer 12 (max)
4.0.2 Preparation
Use the EASE FOCUS software application to design your system to suit the venue.
This will calculate which y grid mounting hole to attach your bow shackle.
4.0.3 Location
Move the rst MS215 subwoofer so it is sitting upright on a safe at surface,
directly below the suspension point.
4.0.4 Measured Weights
Measured Weights
Item Quantity Weight
MAN-FG 1 53 kg 116.9 lbs
MS215 1 83 kg 183 lbs
4.0.5 MAN-FG Fly Grid WLL (10:1 Safety Factor)
Item Working Load Limit (WLL) 4 Point Suspension
MAN-FG 1009 kg 2224 lbs
The following procedure describes how to assemble a MS215 subwoofer to the
MAN-FG y grid.
The MAN-FG y grid is attached to the top of the MS215 subwoofer, using the
subwoofer's 4 mounting links, and four lower rigging pins of the MAN-FG y grid.
! WARNING
DO NOT EXCEED A TOTAL QUANTITY OF 12 MS215 SUBWOOFERS FOR ONE MAN-FG
FLY GRID. FAILURE TO FOLLOW INSTRUCTIONS MAY CAUSE PERMANENT INJURY
OR DEATH.
4.0.6 Personnel
The following procedures shall be undertaken by experienced, certied,
qualied, and authorised personnel only. The procedures require the use of three
or more authorised persons.
Protective Headwear shall be worn
Protective Footwear shall be worn
Protective Gloves shall be worn
Protective Eyewear shall be worn
Practice Safe Lifting