Rigging Manual
Table Of Contents
- (EN) Safety Instruction
- Chapter 1: Safety Information
- Chapter 2: Introduction
- Chapter 3: Assembling an MV212 Array on a MAN-FG Fly Grid
- Chapter 4: Assembling MS215 Subwoofers on a MAN-FG Fly Grid
- Chapter 5: Assembling an MV212 Array with a MS215 Subwoofer
- Chapter 6: Groundstack of two MS215 Subwoofers
- Chapter 7: Groundstack MS215 Subwoofer and MV212 Array
- Chapter 8: MV212-VT and MS215-VT Vertical Transporters
- Chapter 9: Safety Inspection
- Chapter 10: Enclosure quantities and combinations for MAN-FG fly grid suspension at 10:1, 7:1, and 5:1 design factors
13 MANCHESTER SERIES Rigging Manual
2.2.6 EASE example: Mixed Array MS215 x 6, MV212 x 16, with MAN-FG Tip Bar Mounted Rearwards
This example uses the Tip Bar mounted in the rear position on the MAN-FG y grid. All four rigging pins are used to secure the Tip Bar to the MAN-FG y grid.
It also shows a warning that the Working Load Limit of the MAN-FG ygrid has been exceeded (at 10:1)
This means the array is now at 7:1 WLL