Rigging Manual
Table Of Contents
- (EN) Safety Instruction
- Chapter 1: Safety Information
- Chapter 2: Introduction
- Chapter 3: Assembling an MV212 Array on a MAN-FG Fly Grid
- Chapter 4: Assembling MS215 Subwoofers on a MAN-FG Fly Grid
- Chapter 5: Assembling an MV212 Array with a MS215 Subwoofer
- Chapter 6: Groundstack of two MS215 Subwoofers
- Chapter 7: Groundstack MS215 Subwoofer and MV212 Array
- Chapter 8: MV212-VT and MS215-VT Vertical Transporters
- Chapter 9: Safety Inspection
- Chapter 10: Enclosure quantities and combinations for MAN-FG fly grid suspension at 10:1, 7:1, and 5:1 design factors
33 MANCHESTER SERIES Rigging Manual
Procedure 4.1 Connecting MS215 Subwoofers to the MAN-FG Fly Grid
1
5
4
2
3
1
1. Prepare the MAN-FG y grid by pulling out the 4 lower rigging pins (1).
Attach the single shackle plate (2) using its 2 rigging pins (3), to the y grid
mounting position recommended by the EASE FOCUS software.
2. Prepare the MS215 subwoofer by pulling out its 4 top pins (4) so the top links
(5) spring up. Reinsert the top pins (4) to secure the links in the up position.
Double check that all pins are correctly inserted, before
proceeding further.
3. Carefully lift the MAN-FG y grid on top of the MS215 subwoofer and align
the y grid's lower mounting slots with the top links (5) of the subwoofer.
Insert the y grid's 4 pins (1) to secure the y grid to the subwoofer's
top links (5).
Take care not to trap your ngers between components.
Double check that all pins are correctly inserted,
before proceeding further.
4. To attach a second subwoofer, rst attach a bow shackle or other lifting
equipment to the y grid shackle plate (2), then attach the hook and chain.
Carefully raise the y grid/subwoofer assembly to a reasonable working
height to allow attachment of the lower subwoofer.
5. Move the lower MS215 subwoofer to a position directly below the top
subwoofer. Make sure it is resting on a at steady surface.