Rigging Manual
Table Of Contents
- (EN) Safety Instruction
- Chapter 1: Safety Information
- Chapter 2: Introduction
- Chapter 3: Assembling an MV212 Array on a MAN-FG Fly Grid
- Chapter 4: Assembling MS215 Subwoofers on a MAN-FG Fly Grid
- Chapter 5: Assembling an MV212 Array with a MS215 Subwoofer
- Chapter 6: Groundstack of two MS215 Subwoofers
- Chapter 7: Groundstack MS215 Subwoofer and MV212 Array
- Chapter 8: MV212-VT and MS215-VT Vertical Transporters
- Chapter 9: Safety Inspection
- Chapter 10: Enclosure quantities and combinations for MAN-FG fly grid suspension at 10:1, 7:1, and 5:1 design factors
34 MANCHESTER SERIES Rigging Manual
6
5
4
6
6. Prepare the upper subwoofer by removing its 4 lower pins (6).
7. Prepare the lower subwoofer by pulling out its 4 top pins (4) so the top links
(5) spring up. Reinsert the top pins (4) to secure the links in the up position.
8. Carefully lower the upper subwoofer and y grid assembly onto the
lower subwoofer, and align the lower subwoofer's top links (5) with the
corresponding slots in the bottom of the upper subwoofer.
Take care not to trap your ngers between components.
9. Insert the upper subwoofer's 4 lower pins (6) to secure the subwoofers
together.
Double check all the connections to make sure that the MS215
subwoofers and the MAN-FG y grid are securely connected
together.
10. The addition of one more MS215 subwoofer is performed by repeating steps
6 through 9.
! WARNING
DO NOT EXCEED A TOTAL QUANTITY OF 12 MS215 SUBWOOFERS FOR ONE MAN-FG
FLY GRID. FAILURE TO FOLLOW INSTRUCTIONS MAY CAUSE PERMANENT INJURY OR
DEATH.
NOTE
Disassembly is the reverse of assembly.