Rigging Manual

35 MANCHESTER SERIES Rigging Manual
Chapter 5: Assembling an MV212 Array with a MS215 Subwoofer
5.0.1 Required Components
Item Quantity
MAN-FG Fly Grid 2
MS215 Subwoofer 1
MV212 Cabinet 1
5.0.2 Measured Weights
Item Quantity Weight
MAN-FG 1 53 kg 116.9 lbs
MV212 1 53 kg 116.9 lbs
MS215 1 83 kg 183 lbs
5.0.3 MAN-FG Fly Grid WLL (10:1 Safety Factor)
Item Working Load Limit (WLL) 4 Point Suspension
MAN-FG 1009 kg 2224 lbs
The following procedure describes how to assemble a mixed array consisting of
one MS215 subwoofer and MV212 cabinets below it.
One MAN-FG y grid is attached to the top of the MS215 subwoofer, using
components supplied with the MAN-FG y grid.
A second MAN-FG y grid is attached to the bottom of the lowest MS215
subwoofer, using components supplied with the MAN-FG y grid.
! WARNING
VARIOUS MIXTURES OF MV212 CABINETS AND MS215 SUBWOOFERS CAN BE
CONFIGURED BUT DO NOT EXCEED A TOTAL WEIGHT OF 1009 KG.
! WARNING
THIS ARRAY SHALL ONLY BE MADE WITH THE MS215 SUBWOOFER ON TOP, AND THE
MV212 CABINETS BELOW. FAILURE TO FOLLOW INSTRUCTIONS MAY CAUSE
PERMANENT INJURY OR DEATH.
5.0.1 Personnel
The following procedures shall be undertaken by experienced, certied,
qualied, and authorised personnel only. The procedures require the use of three
or more authorised persons.
Protective Headwear shall be worn
Protective Footwear shall be worn
Protective Gloves shall be worn
Protective Eyewear shall be worn
Practice Safe Lifting