Rigging Manual
Table Of Contents
- (EN) Safety Instruction
- Chapter 1: Safety Information
- Chapter 2: Introduction
- Chapter 3: Assembling an MV212 Array on a MAN-FG Fly Grid
- Chapter 4: Assembling MS215 Subwoofers on a MAN-FG Fly Grid
- Chapter 5: Assembling an MV212 Array with a MS215 Subwoofer
- Chapter 6: Groundstack of two MS215 Subwoofers
- Chapter 7: Groundstack MS215 Subwoofer and MV212 Array
- Chapter 8: MV212-VT and MS215-VT Vertical Transporters
- Chapter 9: Safety Inspection
- Chapter 10: Enclosure quantities and combinations for MAN-FG fly grid suspension at 10:1, 7:1, and 5:1 design factors
36 MANCHESTER SERIES Rigging Manual
Procedure 5.1 - Attaching the MAN-FG y grids to the MS215 Subwoofer
1
1
1
3
1
2
2
3
2
3
2
3
1. Perform the previous procedure in Chapter 4: Procedure 4.1 steps 1 to 3,
to attach the MAN-FG y grid to the MS215 subwoofer.
Procedure Description of Work Check
4.1 step 1 to
step 3
Attaching the MS215 Subwoofer to the
MAN-FG Fly Grid
Double check all pins are correctly inserted, and that the y
grid is securely attached to the subwoofer.
2. Attach a bow shackle or other lifting equipment securely to the single
shackle plate of the MAN-FG y grid, then attach the hook and chain.
Carefully raise the y grid/subwoofer assembly to a reasonable working
height to allow attachment of the second MAN-FG y grid.
3. Prepare the subwoofer by pulling out the 4 lower rigging pins (1).
4. Prepare the second MAN-FG y grid by pulling out the 4 top rigging pins (2),
and moving the 4 top links (3) to the up position. Secure the links in the up
position by fully inserting the pins (2). Remove the single shackle plate and
secure it in the stowed position with its 2 pins.
5. Carefully align the top links (3) of the y grid assembly with the
corresponding mounting positions on the bottom of the subwoofer, and
then hold the y grid in place.
Take care not to trap your ngers between components.
6. Insert the subwoofer's 4 lower pins (1) to secure the y grid to subwoofer.
Double check all pins are correctly inserted, and that the y
grid is securely attached to the subwoofer.