Rigging Manual
Table Of Contents
- (EN) Safety Instruction
- Chapter 1: Safety Information
- Chapter 2: Introduction
- Chapter 3: Assembling an MV212 Array on a MAN-FG Fly Grid
- Chapter 4: Assembling MS215 Subwoofers on a MAN-FG Fly Grid
- Chapter 5: Assembling an MV212 Array with a MS215 Subwoofer
- Chapter 6: Groundstack of two MS215 Subwoofers
- Chapter 7: Groundstack MS215 Subwoofer and MV212 Array
- Chapter 8: MV212-VT and MS215-VT Vertical Transporters
- Chapter 9: Safety Inspection
- Chapter 10: Enclosure quantities and combinations for MAN-FG fly grid suspension at 10:1, 7:1, and 5:1 design factors
37 MANCHESTER SERIES Rigging Manual
Procedure 5.2 - Attaching the MV212 Cabinets to the MS215 Subwoofer
1. Perform the previous procedure in Chapter 3: Procedure 3.1 steps 3 to 12,
to attach MV212 cabinets to the lower MAN-FG y grid.
Procedure Description of Work Check
3.1 step 3 to
step 12
Connecting MV212 cabinets to the MAN-FG y grid
Double check all pins are correctly inserted, and that the
MV212 cabinets are securely attached to the MAN-FG y grid.
2. Add further MV212 cabinets below the rst MV212 cabinet, in a similar way.
3. Alternatively, a previously-assembled group of MV212 cabinets can be
assembled to the lower MAN-FG y grid. See Chapter 3, Procedure 3.2:
Adding a group of MV212 Cabinets to the MAN-FG Fly Grid.
Procedure Description of Work Check
3.2
Adding a group of MV212 cabinets to the
MAN-FG y grid