Rigging Manual
Table Of Contents
- (EN) Safety Instruction
- Chapter 1: Safety Information
- Chapter 2: Introduction
- Chapter 3: Assembling an MV212 Array on a MAN-FG Fly Grid
- Chapter 4: Assembling MS215 Subwoofers on a MAN-FG Fly Grid
- Chapter 5: Assembling an MV212 Array with a MS215 Subwoofer
- Chapter 6: Groundstack of two MS215 Subwoofers
- Chapter 7: Groundstack MS215 Subwoofer and MV212 Array
- Chapter 8: MV212-VT and MS215-VT Vertical Transporters
- Chapter 9: Safety Inspection
- Chapter 10: Enclosure quantities and combinations for MAN-FG fly grid suspension at 10:1, 7:1, and 5:1 design factors
40 MANCHESTER SERIES Rigging Manual
Procedure 6.1 - Assembling two MS215 Subwoofers
3
1
1
2
1. Prior to stacking, ensure that the lower subwoofer is mounted on a ξat, dry,
and solid horizontal surface, capable of safely bearing the weight of the
assembly.
2. Pull out the lower subwoofer's 4 upper pins (2), and the spring-loaded
mounting links (3) will move to the up position. Reinsert the pins (2) to
secure the links (3) in the up position.
3. Pull out the upper subwoofer's 4 lower pins (1). With the help of one or more
assistants, carefully lift and add the upper subwoofer on top of the lower
subwoofer, and align the lower subwoofer's links (3) in the corresponding
slots in the bottom of the upper subwoofer.
Take care not to trap your ξngers between components.
4. Reinsert the upper subwoofer's rigging pins (1) to secure the top links (3) of
the lower subwoofer to the upper subwoofer.
Double check all the connections to make sure that the
MS215 subwoofers are securely connected together.
5. The upper subwoofer's top links (3) can also be secured in the up position
with the rigging pins (2). These links can then be used as tie-down points for
the ground stack assembly to prevent tipping.
6. The MS215 subwoofers can also be installed rear-facing. A front-mounted
input on each MS215 can be used to make the speaker wiring connections
easier and neater.
β! WARNING
DO NOT EXCEED A TOTAL QUANTITY OF 3 MS215 SUBWOOFERS FOR THIS
GROUNDSTACK CONFIGURATION. FAILURE TO FOLLOW INSTRUCTIONS MAY CAUSE
PERMANENT INJURY OR DEATH.
NOTE
Disassembly is the reverse of assembly.