Rigging Manual
Table Of Contents
- (EN) Safety Instruction
- Chapter 1: Safety Information
- Chapter 2: Introduction
- Chapter 3: Assembling an MV212 Array on a MAN-FG Fly Grid
- Chapter 4: Assembling MS215 Subwoofers on a MAN-FG Fly Grid
- Chapter 5: Assembling an MV212 Array with a MS215 Subwoofer
- Chapter 6: Groundstack of two MS215 Subwoofers
- Chapter 7: Groundstack MS215 Subwoofer and MV212 Array
- Chapter 8: MV212-VT and MS215-VT Vertical Transporters
- Chapter 9: Safety Inspection
- Chapter 10: Enclosure quantities and combinations for MAN-FG fly grid suspension at 10:1, 7:1, and 5:1 design factors
8 MANCHESTER SERIES Rigging Manual
2.2 Rigging and Acoustic Simulation Software
The EASE FOCUS software allows you to congure the system for optimal performance and coverage in the venue.
The software can be downloaded from http://www.afmg.eu/index.php/products.html
The quantity of cabinets can be varied, the angles of each cabinet can be adjusted, and the SPL coverage calculated for any conguration.
Once an optimum system has been designed using the EASE FOCUS software, the angles of each MV212 cabinet should be noted, as well as the correct suspension hole
on the MAN-FG y grid, where your bow shackle would be tted for single-point suspension. For two-point suspension, pick point holes on the MAN-FG Tip Bar can be
utilized in conjunction with front and rear chain motors to obtain the desired array site angle.
The EASE FOCUS screenshot below is for a typical MV212 conguration. Check the “RIGGING” Tab and and note installation parameters such as: array weight,
bottom element elevation above ground level, bottom enclosure angle.
Note the angle of each MV212 cabinet in the “Object Properties” Tab.
! WARNING
ERROR AND WARNING INDICATIONS ARE GIVEN IN THE OBJECT PROPERTIES WINDOW IF WORKING LOAD LIMITS ARE EXCEEDED AT 10:1, 7:1 OR 5:1 DESIGN
FACTORS. HEED THESE WARNINGS AT ALL TIMES IN ACCORDANCE WITH LOCAL REGULATIONS.
2.2.1 EASE FOCUS Typical Screenshot for a MV212 Array
Rigging Tab Shows the layout graphically,
and indicates the correct suspension pick point to
choose on the y grid.
MV212 Cabinet Angles