Rigging Manual

ManualsBrandsTurbosound ManualsLive SoundManchester Series Passive 4000W Dual 15" Vented Bandpass Subwoofer

Table Of Contents

(EN) Safety Instruction
Chapter 1: Safety Information
Chapter 2: Introduction
Chapter 3: Assembling an MV212 Array on a MAN-FG Fly Grid
Chapter 4: Assembling MS215 Subwoofers on a MAN-FG Fly Grid
Chapter 5: Assembling an MV212 Array with a MS215 Subwoofer
Chapter 6: Groundstack of two MS215 Subwoofers
Chapter 7: Groundstack MS215 Subwoofer and MV212 Array
Chapter 8: MV212-VT and MS215-VT Vertical Transporters
Chapter 9: Safety Inspection
Chapter 10: Enclosure quantities and combinations for MAN-FG fly grid suspension at 10:1, 7:1, and 5:1 design factors

9 MANCHESTER SERIES Rigging Manual

2.2.2 EASE example: Array MV212 x 8, with MAN-FG Tip Bar Centered

This example uses the Tip Bar mounted in the center position of the MAN FG y grid.

Note: for systems that do not require much variation in the tilt angle, and in systems that only require one main hoist, the single shackle plate can be used instead of

the Tip Bar. All four rigging pins are used to secure the Tip Bar to the MAN-FG y grid.