User's Manual
Table Of Contents
- Important Safety Instructions
- Legal Disclaimer
- Limited warranty
- Chapter 1: Safety Information
- Chapter 2: Introduction
- Chapter 3: Assembling an MV212 Array on a MAN-FG Fly Grid
- Chapter 4: Assembling MS215 Subwoofers on a MAN-FG Fly Grid
- Chapter 5: Assembling an MV212 Array with a MS215 Subwoofer
- Chapter 6: Groundstack of two MS215 Subwoofers
- Chapter 7: Groundstack MS215 Subwoofer and MV212 Array
- Chapter 8: MV212-VT and MS215-VT Vertical Transporters
- Chapter 9: Safety Inspection
- Chapter 10: Enclosure quantities and combinations for MAN-FG fly grid suspension at 10:1, 7:1, and 5:1 design factors
17 MANCHESTER SERIES Rigging Manual
2.8 Rigging Component Traceability Markings
Each component of the rigging system is marked with a number that allows it to be identied for tracebility purposes. The illustrations below show the locations of the
tracebility markings on the various components.
Note: These are not part numbers for ordering spare parts.
Rigging Component Traceability Markings
Single Shackle Plate
Ground Stack
Plate
Tip Bar
MAN-FG
Fly Grid
Mounting Link
MV212
Side Bracket
MV212 Rear Bracket
MV212 Rear
Slide Plate
MS215
Side Bracket
Pop Up Link