User's Manual
Table Of Contents
- Important Safety Instructions
- Legal Disclaimer
- Limited warranty
- Chapter 1: Safety Information
- Chapter 2: Introduction
- Chapter 3: Assembling an MV212 Array on a MAN-FG Fly Grid
- Chapter 4: Assembling MS215 Subwoofers on a MAN-FG Fly Grid
- Chapter 5: Assembling an MV212 Array with a MS215 Subwoofer
- Chapter 6: Groundstack of two MS215 Subwoofers
- Chapter 7: Groundstack MS215 Subwoofer and MV212 Array
- Chapter 8: MV212-VT and MS215-VT Vertical Transporters
- Chapter 9: Safety Inspection
- Chapter 10: Enclosure quantities and combinations for MAN-FG fly grid suspension at 10:1, 7:1, and 5:1 design factors
20 MANCHESTER SERIES Rigging Manual
2.13 Rigging Pins
See Chapter 9 for information regarding inspection, care, and maintenance.
2
1
1
3
These quick release pins are the fundamental mechanical fastener for the
assembly of the MAN-FG y grid, MV212 cabinet, and the MS215 subwoofer.
1. Spring Balls – These are locking devices that prevent the pin from pulling
out once it has been inserted.
2. Spring Release – Press this button in and the spring balls (1) will
unlock and allow the pin to be inserted into the mounting holes and links.
Release this button and the spring balls will lock and prevent the pin from
pulling back out.
3. Lanyard – These prevent the pins from being easily lost.
WARNING
BEFORE EVERY USE, INSPECT ALL PINS FOR DAMAGE, AND VERIFY THE CORRECT
OPERATION OF THE SPRING LOCKING MECHANISM. DO NOT USE ANY PINS THAT
SHOW SIGNS OF DAMAGE. FAILURE TO FOLLOW INSTRUCTIONS MAY CAUSE
PERMANENT INJURY OR DEATH.
WARNING
BEFORE EVERY USE, MAKE SURE THAT ALL PINS ARE CLEAN AND FREE FROM
DIRT AND DEBRIS THAT MAY INTERFERE WITH THE CORRECT OPERATION OF THE
SPRING LOCKING MECHANISM. FAILURE TO FOLLOW INSTRUCTIONS MAY CAUSE
PERMANENT INJURY OR DEATH.