Product Information Document
10 of 13
Product Information Document
2 Way 12" Full Range Loudspeaker for
Portable PA and
Installation Applications (White)
Portable
NuQ122-WH
Architecture & Engineering Specications
The speaker shall be of the full range, two-way switchable bi-amp/passive type consisting of one 12" (316 mm) LF driver and one 1" (25 mm) HF
compression driver. Performance specications of a typical production unit shall meet or exceed the following: frequency response, measured
with swept sine wave input, shall be at within ±3 dB from 55 Hz to 18 kHz and within -10 dB from 50 Hz to 20 kHz. Nominal dispersion, at -6 dB
points, shall average 70° H x 70° V. Nominal impedance shall be HF: 6 Ohms, LF: 8 Ohms; passive: 8 Ohms. Power handling shall be HF: 40 Watts
continuous, 160 Watts peak, LF: 400 Watts continuous, 1,600 Watts peak; passive: 400 Watts continuous, 1,600 Watts peak. Sensitivity, measured
on axis, mean averaged over stated bandwidth, shall be 96 dB, 1 Watt @ 1 metre. Maximum SPL (peak), measured at 1 metre with music program
at stated amplier input, shall be HF: 128 dB, LF: 128 dB; passive: 128 dB. Dimensions: 655 mm high x 373.5 mm wide x 340 mm deep (25.8" x
14.7" x 13.4"). Net weight: 19.6 kg (43.1 lbs). The loudspeaker system shall be the TURBOSOUND NuQ122-WH. No other loudspeaker shall be
acceptable unless submitted data from an independent test laboratory veries that the above combined performance / size specications are
equaled or exceeded.