Product Information Document
10 of 13
Product Information Document
2 Way 15" Full Range Loudspeaker for
Portable PA and Installation Applications
Portable
NuQ152
Architecture & Engineering Specications
The speaker shall be of the full range, two-way switchable bi-amp/passive type consisting of one 15" (394 mm) LF driver and one 1" (25 mm) HF
compression driver. Performance specications of a typical production unit shall meet or exceed the following: frequency response, measured
with swept sine wave input, shall be at within ±3 dB from 50 Hz to 18 kHz and within -10 dB from 45 Hz to 20 kHz. Nominal dispersion,
at -6 dB points, shall average 70° H x 70° V. Nominal impedance shall be HF: 6 Ohms, LF: 8 Ohms; passive: 8 Ohms. Power handling shall
be HF: 40 Watts continuous, 160 Watts peak, LF: 500 Watts continuous, 2,000 Watts peak; passive: 500 Watts continuous, 2,000 Watts peak.
Sensitivity, measured on axis, mean averaged over stated bandwidth, shall be 97 dB, 1 Watt @ 1 metre. Maximum SPL (peak), measured at
1 metre with music program at stated amplier input, shall be HF: 128 dB, LF: 130 dB; passive: 130 dB. Dimensions: 712 mm high x 430 mm
wide x 385 mm deep (28" x 16.9" x 15.2"). Net weight: 24.4 kg (53.7 lbs). The loudspeaker system shall be the TURBOSOUND NuQ152. No other
loudspeaker shall be acceptable unless submitted data from an independent test laboratory veries that the above combined performance /
size specications are equaled or exceeded.