Product Information Document

8 of 13

2 Way 15" Full Range Loudspeaker for

Portable PA and Installation Applications

Portable

NuQ152

Mounting and Rigging

The cabinet is tted with M10 x 12 and M8 x 4 internally-threaded rigging points that allow it to be rigged with optional shoulder eyebolts and

mounted in many dierent congurations in permanent installations. The simplest method of rigging is to use the two M10 rigging points on

the top, and a single pull-back rigging point in the centre of the rear panel. Adjustment of the length of the rear cable allows the cabinet to be

angled for optimum room coverage. Cabinets may also be hung upside down if required.

The cabinet has an integral 35 mm pole mount socket in the bottom panel, that allows it to be pole mounted. The cabinet is compatible with

TURBOSOUND brackets, and industry standard brackets.

The optional NuQ152-FY y yoke adds further installation exibility for scaold, surface, and pole mounting.

Suspension using M10

shoulder eyebolts.

pole or speaker stand

Mounting on 35 mm NuQ152-FY y yoke.