Product Information Document

8 of 13

2 Way 8" Full Range Loudspeaker for

Portable PA and Installation Applications

Portable

NuQ82

Mounting and Rigging

The cabinet is tted with M10 x 8 and M8 x 3 internally-threaded rigging points that allow it to be rigged with optional shoulder eyebolts and

mounted in many dierent congurations in permanent installations. The simplest method of rigging is to use the two M10 rigging points on

the top, and a single pull-back rigging point in the centre of the rear panel. Adjustment of the length of the rear cable allows the cabinet to be

angled for optimum room coverage. Cabinets may also be hung upside down if required.

The cabinet has an integral 35 mm pole mount socket in the bottom panel, that allows it to be pole mounted. The cabinet is compatible with

TURBOSOUND brackets, and industry standard brackets.

The optional NuQ82-SB swivel bracket allows the cabinet to be surface mounted and angled for optimum positioning and coverage.

The NuQ82-EB extender bracket allows cabinets to be arrayed, and the NuQ82-FY y yoke adds further installation exibility for scaold, surface,

and pole mounting.

NuQ82-SB swivel

bracket for surface

mounting

Suspension using M10

shoulder eyebolts

Mounting on 35 mm

pole or speaker stand

NuQ82-SB bracket

with NuQ82-EB

extender brackets,

creating an array

NuQ82-FY y yoke