Quick Start Guide

46 TBV-AN BERLIN SERIES
TBV123-AN TBV118L-AN
Power Supply
Current consumption Input: 20A Max, Link output: 15A Max Input: 20A Max, Link output: 15A Max
Power consumption 200 W @ 1/8 max power for individual product 180 W @ 1/8 max power for individual product
Voltage
USA / Canada/ Japan
UK / Australia / Europe / Korea / China
100 – 120 V~, 50/60 Hz
220 – 240 V~, 50/60 Hz
100 – 120 V~, 50/60 Hz
220 – 240 V~, 50/60 Hz
Enclosure
Dimensions (H x W x D) 344 x 598 x 398 mm (13.6 x 23.5 x 15.7) 513 x 598 x 751 mm (20.2 x 23.5 x 29.6")
Net weight 23.0 kg (50.7 lbs) 38.5 kg (84.9 lbs)
Construction 18 mm (¾") plywood 18 mm (¾") plywood
Finish Semi matt black paint Semi matt black paint
Grille Powder coated perforated steel Powder coated perforated steel
Suspension hardware Integral Suspension System and M10 x 4 points Integral Suspension System and M10 x 4 points
Accessories
TBV123-FB Fly Bar TBV123-FB Fly Bar
TBV123-RC2 Road case for 2x TBV123-AN TBV118L-RC1 Road case for 1x TBV118L-AN
TS-PC12-3 Protective cover for 1x TBV123-AN TS-PC18B-3 Protective cover for 1x TBV118L-AN
TPOLE 60-20 60 cm Lightweight Steel Pole with M20 Screw Attachment
TPOLE 90-20 90 cm Lightweight Steel Pole with M20 Screw Attachment
TPOLE 120-20 120 cm Lightweight Steel Pole with M20 Screw Attachment
Technical Specications
TBV123-AN TBV118L-AN
System
Frequency response
65 Hz – 20 kHz ±3 dB
53 Hz – 20 kHz -10 dB
45 Hz – 200 Hz ±3 dB
31 Hz – 300 Hz -10 dB
Nominal dispersion 100° H x 15° V @ -6 dB points Half Space
Maximum SPL 131 dB peak 133 dB peak
Crossover type Active Active
Transducers
1 x 12" (316 mm) LF driver
2 x 1" (25.4 mm) HF compression driver
1 x 18" (460 mm) LF driver
Limiter Independent HF, LF, peak and rms Peak and rms
Amplier
Maximum output power* 2500 W 3000 W
Type Class-D Class-D
Protection Short circuit, thermal Short circuit, thermal
Connectors
Input A / B
Sensitivity
Input impedance
Maximum input level
1 x combo jack/XLR, 1 x XLR
-2 dBu
40 kΩ balanced
+18 dBu
1 x combo jack/XLR, 1 x XLR
+1 dBu
40 kΩ balanced
+18 dBu
Ultranet input/link 2 x RJ45/Neutrik etherCON 2 x RJ45/Neutrik etherCON
Mains Supply Neutrik powerCON† 20A and Link 15A Neutrik powerCON† 20A and Link 15A
Controls
DSP
Rotary push-encoder and level control
Buttons for Process, Setup, Exit, Enter
Rotary push-encoder and level control
Buttons for Process, Setup, Exit, Enter
User DSP Functions
Factory EQ Presets Positioning, Array mode, FBQ Positioning, FBQ
Display LCD 128 x 32, blue, backlit LCD 128 x 32, blue, backlit
Delay 0 - 300 ms 0 - 300 ms
Equalisation High and low shelving EQ 2 x parametric EQ High and low shelving EQ 2 x parametric EQ
Limiter Zero attack input limiter Zero attack input limiter
Presets 20 total presets, 19 user-denable 20 total presets, 19 user-denable
Crossover High pass L-R 24 dB/oct Low pass L-R 24 dB/oct
Protection Lock-out function for all settings Lock-out function for all settings
Ultranet Digital Network
Digital processing
A/D conversion 24-bit, 44.1 / 48 kHz sample rate 24-bit, 44.1 / 48 kHz sample rate
System
Signal, Latency
16 channels
< 0.9 ms
16 channels
< 0.9 ms
Cabling
Cables
Cable length
Shielded CAT5
max. 246 ft / 75 m recommended
Shielded CAT5
max. 246 ft / 75 m recommended
*independent of limiters and driver protection circuits
†Neutrik and powerCON speakON are registered trademarks of Neutrik AG.
†Only qualied personnel are allowed to modify the AC-Main cord and to adhere to all applicable national standards.