Rigging Manual

Table Of Contents

16 TBV123 / TBV123-AN and TBV118L / TBV118L-AN Rigging Manual

2.11 TBV118L Subwoofer Mounting Components

The TBV118L subwoofer has two retractable mounting links at the top

(4), that allow it to be attached to a TBV123-FB ybar, or to another

TBV118L subwoofer, or to a TBV123 cabinet. Eyebolt holes and a pole

mount hole are also present.

1. Eyebolt locations – 4 threaded holes (2 top, 2 bottom)

allow eyebolts to be tted for ying the subwoofer without the

TBV123-FB ybar.

2. Pole Mount – This M20 threaded hole is for the optional

pole mounts, and allows up to 2 TBV123 cabinets to be pole

mounted above the subwoofer.

3. Recesses – These shallow recesses are designed to t the

feet of another TBV118L subwoofer above, or another TLX123

cabinet.

4. Mounting Links – These mounting links are used to

secure the TBV118L subwoofer to a TBV123-FB ybar, or to

another TBV118L, or a TBV123 cabinet in ground stacked mode

only (do not suspend TBV118L enclosures underneath TBV123).

They rotate about a captive pivot bolt.

5. Pins – If the mounting links (4) are in the down position,

then the rigging pins are used to secure them. If the mounting

links are used in the up position, the pins can be used to secure

another TBV118L subwoofer or TBV123 cabinet above. A lanyard

is connected to prevent the loss of the pins.

6. Feet – The TBV118L subwoofer has 4 feet for resting on the

ground, stage, or on top of another TBV118L subwoofer.

Bottom View

Mounting Links Down

Mounting Links Up