Rigging Manual

Rigging Manual 17
The TBV123 cabinet has two retractable mounting links at the top (3),
that allow it to be attached to a TBV123-FB ybar, to another TBV123
cabinet, or to a TBV118L subwoofer. Eyebolt holes and pole mount
holes are also present.
1. Eyebolt locations – 4 threaded holes (2 top, 2 bottom)
allow eyebolts to be tted for ying the TBV123 cabinet without
the TBV123-FB ybar.
2. Recesses – These shallow recesses are designed to t the
feet of another TBV123 cabinet above it.
3. Mounting Links – These mounting links are used to
secure the TBV123 cabinet to a TBV123-FB ybar, or another
TBV123 cabinet or a TBV118L subwoofer. They rotate about a
captive pivot bolt.
4. Pins – If the mounting links (3) are in the down position,
then the rigging pins are used to secure them. If the mounting
links are used in the up position, the pins can be used to secure
another TBV123 cabinet or TBV118L subwoofer above.
A lanyard is connected to prevent the loss of the pins.
5. Feet – The TBV123 cabinet has 4 feet for resting on top of
another TBV123 cabinet or TBV118L subwoofer.
6. Pole Mount Holes – These 35 mm holes underneath are
for the optional pole mounts, and allow the cabinet to be pole
mounted above a TBV118L subwoofer. The front hole allows the
TBV123 cabinet to tilt down compared to the second hole.
2.12 TBV123 Cabinet Mounting Components
Bottom View
5 6
1
1
3
4
Mounting Links Down
3
4
1
2
Mounting Links Up
3
3
4