Rigging Manual

Rigging Manual 21
4. Adjust the position of the mounting links (1) of the lower cabinet to align
with the mounting holes of the top cabinet. Fully insert the rigging pins (2)
and rotate their arms until they are held in place by the clips. This will secure
the rigging pins and also prevent them from rattling from audio vibrations
during operation.
Double check that all pins are correctly inserted,
before proceeding further.
1. Prepare the next TBV123 cabinet, by lifting the mounting links (1) to the
upwards position. The rigging pins (2) will be used to secure this cabinet to
the TBV123 cabinet above.
2. Attach the bow shackle or other lifting equipment securely to the ybar
mounting hole recommended by the EASE FOCUS II software, then attach
the hook and chain.
3. Carefully position the ybar and cabinet assembly until it is on top of the
lower cabinet. The feet of the top cabinet should t into the recesses on the
top surface of the lower cabinet.
Take care not to trap your ngers between components.
Procedure 3.2 Attaching further TBV123 Cabinets
2
2
1
5. The addition of other TBV123 cabinets is performed by repeating steps 3 and
4 for each additional cabinet.
 WARNING
DO NOT EXCEED A TOTAL QUANTITY OF 4 TBV123 CABINETS FOR 1 TBV123-FB
FLYBAR. FAILURE TO FOLLOW INSTRUCTIONS MAY CAUSE PERMANENT INJURY
OR DEATH.
NOTE
Disassembly is the reverse of assembly.