Rigging Manual

Table Of Contents

Rigging Manual 29

Procedure 6.1 Assembling a TBV118L Ground Stack

1. Prepare the rst TBV118L subwoofer, by lifting the mounting links (1) to the

upwards position. The rigging pins (2) will be used to secure this subwoofer

to the subwoofer to be added on top.

2. Carefully position the next TBV118L subwoofer until it is on top of the

prepared lower subwoofer. The feet of the top subwoofer should t into the

recesses on the top surface of the lower subwoofer.

Take care not to trap your ngers between components.

3. Adjust the position of the mounting links (1) of the lower subwoofer to align

with the lower mounting holes of the upper subwoofer. Fully insert the

rigging pins (2) and rotate the arms until they are held in place by the clips.

This will further secure the rigging pins and also prevent them from rattling

from audio vibrations during operation.

Double check that all pins are correctly inserted,

before proceeding further.