Rigging Manual

32 TBV123 / TBV123-AN and TBV118L / TBV118L-AN Rigging Manual
Procedure 7.1 - Assembling a TBV118L Subwoofer and TBV123 Ground Stack
1. Prepare the TBV118L subwoofer, by lifting the mounting links (1) to the
upwards position. The rigging pins (2) will be used to secure this subwoofer
to the TBV123 cabinet on top.
2. Carefully position the TBV123 cabinet until it is on top of the prepared lower
subwoofer. The feet of the TBV123 cabinet should t into the recesses on the
top surface of the TBV118L subwoofer.
Take care not to trap your ngers between components.
3. Adjust the position of the mounting links (1) of the TBV118L subwoofer to
align with the lower mounting holes of the TBV123 cabinet. Fully insert the
rigging pins (2) and rotate the arms until they are held in place by the clips.
This will further secure the rigging pins and also prevent them from rattling
from audio vibrations during operation.
Double check that all pins are correctly inserted,
before proceeding further.
1
1
2
2
1