Rigging Manual

Rigging Manual 41
4. Attach the bow shackle or other lifting equipment securely to the ybar
mounting hole recommended by the EASE FOCUS II software, then attach
the hook and chain.
5. Prepare the next TBV123 cabinet, by removing the rigging pins (2) so the
mounting links drop down.
6. Carefully hoist and position the ybar and cabinet assembly until it is on
top of the lower cabinet. The feet of the lower cabinet should t into the
recesses on the bottom of the top cabinet.
Take care not to trap your ngers between components.
7. Adjust the position of the mounting links (1) of the upper cabinet to align
with the mounting holes of the lower cabinet. Fully insert the rigging pins
(2) and rotate their arms until they are held in place by the clips. This will
secure the rigging pins and also prevent them from rattling from audio
vibrations during operation.
Double check that all pins are correctly inserted,
before proceeding further.
2
1
8. The addition of other TBV123 cabinets is performed by repeating steps 5, 6,
and 7 for each additional cabinet (upto a maximum total of 4). Mount links
for the bottom TBV123 cabinet can be secured using the spare L-rigging pins
that are supplied with the TBV123-FB.
 WARNING
DO NOT EXCEED A TOTAL QUANTITY OF 4 TBV123 CABINETS FOR 1 TBV123-FB
FLYBAR. FAILURE TO FOLLOW INSTRUCTIONS MAY CAUSE PERMANENT INJURY
OR DEATH.
 WARNING
ALWAYS USE A TBV123-FB FLYBAR WHEN FLYING AN ARRAY. FAILURE TO FOLLOW
INSTRUCTIONS MAY CAUSE PERMANENT INJURY OR DEATH.
NOTE
Disassembly is the reverse of assembly.