Rigging Manual

42 TBV123 / TBV123-AN and TBV118L / TBV118L-AN Rigging Manual
An inverted mixed array can be assembled by attaching an inverted TBV118L
cabinet to the TBV123-FB ybar, using the extra mounting links (1) supplied with
the ybar. Inverted TBV123 cabinets can then be attached to the lower side of the
inverted TBV118L cabinet.
1. Prepare the TBV123-FB ybar by adding the extra mounting links (1)
(supplied with the ybar) to the end of each arm, and secure with the
rigging pins (3).
Double check that all pins are correctly inserted,
before proceeding further.
2. Invert the rst TBV118L cabinet and carefully position the TBV123-FB ybar
until it is on top of the inverted TBV118L cabinet.
Take care not to trap your ngers between components.
3. Adjust the position of the mounting links (1) of the TBV123-FB ybar to align
with the top mounting holes of the TBV118L cabinet. Fully insert the rigging
pins (2) and rotate the arms until they are held in place by the clips. This will
further secure the rigging pins and also prevent them from rattling from
audio vibrations during operation.
Double check that all pins are correctly inserted,
before proceeding further.
1
2
10.2 Assembling an Inverted Mixed Array
21
3
3
1
2
3
4