Rigging Manual
Table Of Contents
- Important Safety Instructions
- Legal Disclaimer
- Limited warranty
- Chapter 1: Safety Information
- Chapter 2: Introduction
- Chapter 3: Assembling a TBV123 Array on a TBV123-FB Flybar
- Chapter 4: Assembling a TBV118L Array on a TBV123-FB Flybar
- Chapter 5: Assembling a Mixed Array on a TBV123-FB Flybar
- Chapter 6: Assembling a TBV118L Ground Stack
- Chapter 7: Assembling a TBV118L Subwoofer and TBV123 Ground Stack
- Chapter 8: Assembling a TBV123 Array Ground Stack
- Chapter 9: Pole Mounting a TBV123 Cabinet on a TBV118L Subwoofer
- Chapter 10: Assembling an Inverted TBV123 Array
- Chapter 11: Using Eyebolts
- Chapter 12: Safety Inspection
- Chapter 13: TBV Enclosure Quantities and Combinations for TBV123-FB Flybar Suspension at 10:1, 7:1, 5:1 Design Factors
- Manufacturer’s Declaration
Rigging Manual 43
4. Attach the bow shackle or other lifting equipment securely to the ybar
mounting hole recommended by the EASE FOCUS II software, then attach
the hook and chain.
5. Prepare the inverted TBV123 cabinet. Carefully hoist and position the
ybar and cabinet assembly until it is on top of the TBV123 cabinet.
The feet of the TBV123 cabinet should t into the recesses on the bottom of
the TBV118L cabinet.
Take care not to trap your ngers between components.
6. Remove TBV118L rigging pins(3) so the mounting links (4)drop down.
Adjust the position of the mounting links (4) of the TBV118L cabinet to align
with the mounting holes of the TBV123 cabinet. Fully insert the rigging
pins (3) and rotate their arms until they are held in place by the clips.
This will secure the rigging pins and also prevent them from rattling from
audio vibrations during operation.
Double check that all pins are correctly inserted,
before proceeding further.
3
4
3
5
6
4