Rigging Manual

8 TBV123 / TBV123-AN and TBV118L / TBV118L-AN Rigging Manual
2.2 Rigging and Acoustic Simulation Software
The EASE FOCUS II software allows you to congure the system for optimal performance and coverage
in the venue.
The software can be downloaded from http://www.afmg.eu/index.php/products.html
Further information about the TBV models is available from www.turbosound.com
The TBV123 is a constant curvature line array, and the inter-cabinet angle is xed at 15 degrees.
The quantity of cabinets can be varied, and the SPL coverage calculated for any conguration.
Once an optimum system has been designed using the EASE FOCUS II software, the correct suspension hole on
the TBV123-FB ybar should be noted, where your bow shackle would be tted for single-point suspension.
For two-point suspension, pick point holes #1 and #6 can be utilized in conjunction with front and rear chain
motors to obtain the desired array site angle.
The EASE FOCUS II screenshot below is for a typical TBV123 conguration. Check the “RIGGING” Tab and note
installation parameters such as: array weight, bottom element elevation above ground level,
bottom enclosure angle.
 WARNING
ERROR AND WARNING INDICATIONS ARE GIVEN IN THE OBJECT PROPERTIES WINDOW IF WORKING LOAD
LIMITS ARE EXCEEDED AT 10:1, 7:1 OR 5:1 DESIGN FACTORS. HEED THESE WARNINGS AT ALL TIMES IN
ACCORDANCE WITH LOCAL REGULATIONS.
EASE FOCUS II Typical Screenshot for a TBV123/TBV118 Mixed Array
Rigging Tab Shows the layout graphically,
and indicates the correct suspension pick
point to choose on the ybar.
15°
15°
15°
15°