Product Information Document
4 of 9
Product Information Document
Fly Bar for TBV123 and TBV118L Flown and
Ground Stacked Arrays
Loudspeaker Accessories
BERLIN
T BV123- FB
Mounting and Rigging
Safety Warning: Only authorised and certied personnel shall design and install suspended or ground stack congurations, following
the instructions and procedures in the TBV123-FB rigging manual supplied with the TBV123-FB ybar, or downloaded from turbosound.com.
Failure to follow these instructions may lead to death or permanent injury. For maximum array sizes, weights and working load limits, please
consult the TBV123-FB rigging manual.
The TBV123-FB ybar is used to suspend TBV123, TBV123-AN, TBV118L, and TBV118L-AN cabinets, or mixed arrays of each. Each cabinet has
2 mounting links that connect to corresponding mounting holes in the TBV123-FB ybar, and are secured together using 2 rigging pins supplied
with the ybar. Before use the ybar must be assembled by securing the side arms to the main bar using the supplied rigging pins. The main arm
of the ybar has ve y points and one at the front. These 13 mm diameter holes are used to attach a bow shackle or similar lifting equipment for
ying the assembly. The TBV123-FB ybar may be inverted to form the base for a ground stack array of TBV123 or TBV123-AN cabinets with extra
hardware supplied. Cabinets may also be suspended inverted.
Rigging
Pins
Rigging
Pins
Side
Arm
Side
Arm
Main Bar
Extra Hardware
TBV123-FB ybar assembled