Quick Start Guide
8
TCS Passive R series Quick Start Guide
9
Thank you for choosing a TURBOSOUND loudspeaker product for your application. If you would like further
information about this or any other TURBOSOUND product, please visit our website at turbosound.com.
Unpacking the Loudspeaker
After unpacking the unit please check carefully for damage. If damage is found, please notify your
supplier at once. You, the consignee, must instigate any claim. Please retain all packaging in case of future
re-shipment.
System Requirements – Passive and Bi-amped Loudspeakers
TCS62-R 2-way loudspeaker operates as a passive system and requires only one amplifi er channel.
The input signal is divided between the low-frequency and high-frequency drivers internally with a
passive crossover.
TCS122-R and TCS152-R are switchable passive / bi-amp 2-way loudspeakers. Passive and bi-amp modes
are controlled by an internal switch. Passive operation (full range or with a subwoofer) requires 1 amplifi er
channel and 1 controller channel. The input signal is divided between the low-frequency and high-
frequency drivers internally with a passive crossover. Bi-amp operation (full range or with a subwoofer)
requires 2 amplifi er channels and 2 controller channels, one for low frequencies one for high frequencies.
The input signal is divided between the low frequency and high frequency driver in the controller and the
individual amplifi ed signals are fed to the speaker input.
TCS218B-R subwoofer has a 4-wire input to allow operation in parallel or discrete modes. Parallel operation
is achieved by wiring inputs 1 and 2 in parallel and requires only 1 amplifi er channel and 1 controller
channel. Discrete operation is achieved by wiring inputs 1 and 2 separately, requiring 2 amplifi er channels
and 2 controller channels.
TCS115B subwoofer operates as a passive system and requires only one amplifi er channel.
Correct controller settings for all models, horn variants and operation with subwoofers can be downloaded
from the website, and are also available as presents for the LMS series controllers.
TCS weather-resistant loudspeakers are equipped with a 2 metre 4-core cable tail for connection to your
chosen cabling infrastructure, with the exception of TCS62-R and TCS115B-R, which use a 2-core cable tail.
To avoid wasting amplifi er power, you should use heavy-duty speaker cable, with a minimum wire size of
1.5 mm
2
(16 AWG), and preferably 2.5 mm
2
(14 AWG) for longer runs. Use larger wire sizes for TCS218B-R
and speakers wired in parallel. For extreme cable lengths, be aware of cable impedance and resistive
losses. Always observe the correct polarity.
᧙ᄋ߸Мᮍᅽ
ࣝధ൦ಗᄋጽቬܭЧధ
ܹᄋႄุߜڛᝐႄԁᬘǎᬎ
Ώၺࣝధ ¼" TSᩛତ݁
ᄋᰵַ᠐˅ˋܧ٩ጴǎధᄋ߸ᜊួ
ڪᮍႁՍಬᄋ˅ˋցᤊᛢǎ
൦ಗଣᧉ১ַаߜڛఴ
ፑᎇᄋԁᬘႄԎధᝐႄԁᬘǎ
൦ಗଣᧉ১ಋᬅᄋ᧙
ᄋΏၺԤ፦οឮǎឱ឵ధ
Угǎ
࠶
˟ᥙГᝐႄԁᬘឱӉ఼
ᮈᄧᑁ᭨ౝǎܭа෦
ధԼΚၺ፦οΏၺᄋᦋǎឱ࠳፦ο
ᮋႁՍಬᄋ˅ˋցᤊᛢǎ
࠶
˟ᥙГᅍ༣ᝐႄԁᬘឱӉ
࠳൦ܭᎷᭂິ˘ǎ
൦ܭ˸ˁԼԫ͵ຶᄪధ͵ᄋࠕ
٩˸ˁԼᎷЦʾݡᔊၬǎ
࠶
፦οឮ௨ፍՍಬᄋ˅ˋ፦
οցΏၺᄋǎ˟ᥙГᝐႄԁ
ᬘᬕΏၺឮ˻ଣ҃ᄋܲឱӉᤊᛢ
ͶЦ߳፦οǎధ፦οڪᮍႁՍಬᄋ˅
ˋցᤊᛢǎ
1. ឱ឵ᤉឮǎ
2. ឱݱؔεߜᤉឮǎ
3. ឱญధᄋᇩǎ
4. ឱᥗ߷ధᄋឮǎ
5. ឱӉڛ᭦ᤄබᄋڢஶΏၺశַǎ
6. ឱၺࣱ࣌ຎพశַǎ
7. ឱӉ܅܌ᤱ᮴Աǎ߸ᜊశַឱᥗ
ཱིԉࠓᄋឮǎ
8. ឱӉ࠳శַ߸ᜊڛམ຺ᬅᤄ
ݡජྠ༰ߖЦ߳ၸམᄋܭ
Ӌҫ٩ǎ
9. ឱӉሩᬕমତ݁ڢତ݁ᄋ߸М
ᜊᎷǎڢତ݁௨ႁˑ˕ତ܌གྷԤʸ˕
ڢ݁ǎᔫᬥ᠏ଣΚᄋତ݁ˁᤡՍ১
ᄋତឱႄࢻటʸ˕Սᤡᄋତǎ
10. ݱؔεઑႄ຺ጴΏЦˁᜃᢇ҉
ᆢࡀЦญႄ຺ତ݁ǍܴၺତԤܭ
ᤍܬǎ
11. ឱԷΏၺԉࠓࠁᄋᬅܭ֘ᦢǎ
12. ឱԷΏၺԉࠓ
ࠁᄋᬥ᠏ᩚ
ᄋଏᢽ౷ߖ
ʽᝉ౷౷֘ಹ
ߖǎᔫΏၺଏᢽ
ୄᤃܭឱญ
߸МᎷܭ
ᥙГଏᢽ֘
ܭϛωᏬԫǎ
13. ᥆ႄᭈᲟఱˁΏၺశܭ
ឱફѤႄ຺ତ݁ǎ
14. ధ፦οڪᮍႁՍಬᄋ፦οցᤊ
ᛢǎܭԫ૰ᭋᤊᛢ፦οΔݡႄ຺ጴ
ႄ຺ତ݁ԫ૰͵ุЛྮᗁЛܭ
аܭᥔᭂԫܭˁᑠࣣᤃͼ
ᜃگǎ
15. శܭᤍႄ຺ʸࠁధڢ
εઑǎ
16. ᔫႄ຺ତ݁٩Ч
ᏺՍ٩ၺͼளႄᜊᎷ
ε߳ܬᬥԼ
ஶΨ୳ͼ࿅ঘǎ
17. శַᤡၺ๓ફ
2000ዜʿڢӞశַ
ᤡၺ᭥མࣝජό
ʿǎ
ฃܧ
ࠬͶڃڛ൦ឮ˻ଣ҃ᄋМᦋ
ᦋଢᤙǍڐྠܧᏬᤶᄋ૰
݀MUSIC Groupˁ᠈Ͷ᠋ǎ
సԡஞ֘ܲᔫధటஉিˁԴᛢ
ᤱᅽǎధᄋಗڪ˟ЦՋᒮధᏩ
ᄋ᠊ǎMIDASKLARK TEKNIK
TURBOSOUNDBEHRINGERBUGERA
֘DDA௨MUSIC Group IP Ltd.ОՄᄋ
ಗญгಗǎ© MUSIC Group IP
Ltd. 2014ྡీధǎ
εο൝
ధУᮄˮᬸڅεοᄋᤡၺ
൝ԤЦ߳ᄲУθ্ឱᄇᬇ
music-group.com/warranty
Ꭻቤಋᄻߺᄋឡጻθ্ǎ