User Manual

10 TFM-AN/TFX-AN Series Quick Start Guide 11
Networking capability
All TFM-AN/TFX-AN powered loudspeakers o er remote control via USB. The USB connection allows the user to con gure and monitor all DSP parameters using
dedicated software for PC.
The DSP  rmware can also be updated via the USB connection. Visitturbosound.com for the latest  rmware version.
TFM-AN/TFX-AN speakers also o er proprietary ULTRANET networking capabilities through the ULTRANET IN and ULTRANET THRU connections using CAT5 cables with
RJ45 connectors. ULTRANET allows the user to transmit unidirectionally up to 16 independent channels of 24-bit audio throughout the TFM-AN/TFX-AN system, aswell
as other ULTRANET-equipped devices such as digital mixers and personal monitor systems. Upto7devices can be connected in series on a single ULTRANET cable.
MIDAS M32
MIDAS DL16
TFM-AN Series
TFX-AN Series
Networked mains power
TFM-AN loudspeakers also facilitate networked transmission of mains power using power cables with Neutrik powerCON locking power connectors. To set up
networked mains power between TFM-AN loudspeakers,  rst run a power cable terminating in a powerCON connector to the AC INPUT connector on the rear panel.
To power additional speakers downline, run power cables equipped with powerCON connectors at both ends from the  rst speaker’s AC LINK OUTPUT to the AC INPUT
of the next TFM-AN loudspeaker in series.
The maximum number of linked systems depends on the AC supply voltage as well as the maximum current draw of the individual systems in the power chain.
When linking a power chain, make sure that the integrated connectors as well as the supplied AC mains cable are never overloaded. If you are uncertain how to
calculate the total current draw, please contact your dealer.
TFM-AN speakers powered in series