Quick Start Guide
12 TLX LIVERPOOL SERIES Quick Start Guide 13
Rigging and Acoustic Simulation Software
Refer to TLX Liverpool Series Rigging Manuals for safe suspension and installation of the loudspeakers, ybars and all suspension hardware.
TLX Series loudspeakers and ybars are designed and tested to strict BGV-C1 standards. Suspension of these speakers must be performed in accordance with
the rigging manual supplie
d with the respective ybars and available online at turbosound.com
Suspended Arrays
Safety Warning: Only authorised and certi ed personnel shall design and install suspended con gurations, following the instructions and procedures
in the rigging manuals supplied with the TLX43-FLB and TLX84-FLB ybars or downloaded from turbosound.com. Failure to follow these instructions ma
y lead
to death or permanent injury.
Example showing an array of 8 TLX43
loudspeakers with the TLX43-FLB ybar
attached on the top.
Example showing an array of 2 TLX212L
subwoofers with the TLX43-FLB ybar
attached on the top.
Example showing a mixed array with 1
TLX21
2L subwoofer, 4 TLX43 loudspeakers
and 2 TLX43-FLB ybars.
The TLX215L and TLX84 loudspeakers can be also be suspended in similar con gurations, except only the top ybar is required for the mixed array.
For maximum array sizes, weights and working load limit
s, please consult the TLX43-FLB or TLX84-FLB rigging manual.
Ground Stacking
Safety Warning: Only authorised personnel shall design and rig the ground stacked con guration, following the instructions and procedures in the
manual supplied with the ybars or downloaded from turbosound.com. Failure to follow these instructions may lead to death or permanent injury
The TLX212L and TLX43 loudspeak
ers can be con gured in a mixed-array ground stack, with the
TLX212L subwoofer on the ground or stage, the TLX43-FLB ybar attached on top, and the TLX43
mid/top cabinets attached to the ybar.
The TLX215L and TLX84 loudspeakers can be con gure
d in a ground stack with the TLX215L
subwoofer on the ground or stage, and the TLX84 mid/top cabinets mounted directly above it. No
ybar is required for this ground stack.