Quick Start Guide

22 Quick Start Guide 23TSP-AN Series
Fullrange Subwoofer Function
Wall Wall
For positioning the speaker on or next to a wall (xed
install); alternatively as a monitor speaker (wedge).
Ceiling -
For positioning the speaker on a wall next to the ceiling
(xed install).
Corner Corner
For positioning the speaker in a corner next to the
ceiling (xed install); Forpositioning the speaker
in a corner (subwoofer).
DELAY
Delay Delay
Adjusts the amount of delay
(max300 msec = 103.08 m or 338.19feet).
Unit Unit Selector between msec, meterandfeet.
LIMITER
Limit Limit
Adjust the limiter threshold for the input signal
(from OFF down to -30dB). This threshold adjustment
allows you to set a max output power which is below
the speaker system’s rated max output.
SETUP
(page 2)
Version Version Displays the installed rmwareversion.
LOAD
1. - 20. 1. - 20.
To load a specic preset, turn the encoder to select the
desired peset's number, and then either the ENTER button or
the encoder. When asked to conrm press the encoder again
or EXIT to abort.
SAVE
1. - 20. 1. - 20.
To save a preset choose the respectivepreset slot and press
ENTERor theencoder.
Sub Menu
Save Preset Save Preset
Name the preset by choosing the characters with the
encoder and pressing to conrm each character. When
nished, press the ENTER button to save the preset.
SETUP
Contrast Contrast Adjust LCD panel contrast, The default contrast value is 15.
Screen Screen
ON: LCD screen saver (default) turns on automatically
after approx.2minutes.
OFF: LCD turns o automatically after approx. 5 minutes.
Logo Logo
OFF: Deactivates front panel logo illumination.
ON: Activates front panel logo illumination. LIMIT: Logo will
light up when the limiter is active.
Sub Menu
Lock Lock
Lock the device and create a password by choosing the
password characters with the encoder and pressing to
conrm each character. Whennished press the ENTER
button. Unlock the device by entering the password or
connecting the unit via USB to a PC running proprietary
remote software. Thesoftware does not require apassword.
Warning Warning
In case of overheating, an alert appears on the LCD screen,
and the amplier will shut down until the unit cools.
LCD Graphic Indicator
To help the user immediately recognize that a parameter has been selected and changed from the initial default setting, the parameter’s related text on the top-level
screen will invert and change to black text on a white background. As an example, the following screenshots show how the text for the EQ function changes when the
TSP-AN default EQ setting has been changed:
This indicator function occurs only on the main DSP menu level and works for all DSP-related functions, except for the LOAD, SAVE and SETUP sub-sections on the
second page of the top-level SETUP menu.
TSP-AN DSP Menu Structure Mounting and Fixing
TSP-AN full-range series cabinets are designed with multiple internal rigging points to suit many possible mounting methods in permanent installations.
Suspending with Eyebolts
TSP-AN cabinets can be suspended using optional eyebolts coupled to the internal rigging points provided on the
top, bottom and sides and back. Thesimplest method is to use the two rigging points on the top and a single pull-
back rigging point in the centre of the rear panel.
Remove the appropriate countersunk screws and replace them with shoulder eyebolts, which must have a thread
length of at least 18mm. Use the rear rigging point to angle the cabinet for optimum room coverage. Cabinets may
behung upside down if required.
IMPORTANT NOTE: The mounting of a permanently installed sound system may be dangerous unless undertaken
by qualied personnel with the required experience and certication to perform the necessary tasks. Walls, oors
or ceilings must be capable of safely and securely supporting the actual load. Themounting accessory used must be
safely and securely xed both to the loudspeaker and to the wall, oor or ceiling.
When mounting rigging components on walls, oors or ceilings, ensure that all xings and fasteners used are of
an appropriate size and load rating. Wall and ceiling claddings, and the construction and composition of walls and
ceilings, all need to be taken into account when determining whether a particular xing arrangement can be safely
employed for a particular load. Cavity plugs or other specialist xings, if required, must be of an appropriate type,
and must be tted and used in accordance with the maker’sinstructions.
The operation of your speaker cabinet as part of a own system, if installed incorrectly and improperly, canpotentially expose persons to serious health risks and
even death. In addition, please ensure that electrical, mechanical and acoustic considerations are discussed with qualied and certied (by local state or national
authorities) personnel prior to any installation or ying.
Make sure that speaker cabinets are set up and own by qualied and certied personnel only, usingdedicated equipment and original parts and components
delivered with the unit. If any parts or components are missing please contact your dealer before attempting to set up the system.
Be sure to observe the local, state and other safety regulations applicable in your country. Music Tribe, including the Music Tribe companies listed on the enclosed
“Service Information Sheet”, assumes no liability for any damage or personal injury resulting from improper use, installation or operation of the product. Regular
checks must be conducted by qualied personnel to ensure that the system remains in a secure and stable condition. Make sure that, where the speaker is own,
the area underneath the speaker is free of human trac. Do not y the speaker in areas that can be entered or used by members of the public.
Speakers create a magnetic eld, even if not in operation. Therefore, please keep all materials that can be aected by such elds (discs, computers, monitors, etc)
at a safe distance. A safe distance is usually between 1 and 2 metres.