Quick Start Guide
56 Quick Start Guide 57TSP-AN Series
Specications
TSP122-AN TSP152-AN TSP118B-AN
System
Frequency response
50 Hz – 18 kHz ±3 dB
43 Hz – 20 kHz -10 dB
41 Hz – 18 kHz ±3 dB
35 Hz – 20 kHz -10 dB
35 Hz – 90Hz ±3 dB
32 Hz – 100 Hz -10 dB
Nominal dispersion 70° H x 50° V @ -6 dB Points 70° H x 50° V @ -6 dB Points Half space
Maximum SPL 133 dB peak 133 dB peak 134 dB peak
Crossover type Active Active Active
Transducers
1 x 12" (316 mm) LF driver
1 x 1" (25.4 mm) HF compression driver
1 x 15" (394 mm) LF driver
1 x 1" (25.4 mm) HF compression driver
1 x 18" (460 mm) LF driver
Limiter
Independent HF, LF,
peak and rms
Independent HF, LF,
peak and rms
Independent LF, peak and rms
Amplier
Maximum output power* 2500 W 2500 W 3000 W
Type Class-D Class-D Class-D
Protection Short circuit, thermal Short circuit, thermal Short circuit, thermal
Connectors
Input/link 1 x Combo Jack/XLR, 1 x XLR 1 x Combo Jack/XLR, 1 x XLR 1 x Combo Jack/XLR, 1 x XLR
Sensitivity +4 dBu or +14 dBu software switchable +4 dBu or +14 dBu software switchable +4 dBu or +14 dBu software switchable
Input impedance 40 k balanced 40 k balanced 40 k balanced
Maximum input level +22 dBu +22 dBu +22 dBu
Ultranet input/link 2 x RJ45 2 x RJ45 2 x RJ45
Mains supply Neutrik powerCON 20A† Neutrik powerCON 20A† Neutrik powerCON 20A†
Controls
DSP
Rotary push-encoder and levelcontrol
Buttons for process, setup, exit, enter
Rotary push-encoder and levelcontrol
Buttons for process, setup, exit, enter
Rotary push-encoder and levelcontrol
Buttons for Process, Setup, Exit, Enter
User DSP Functions
Factory EQ presets Positioning, sound mode, FBQ Positioning, sound mode, FBQ Positioning, sound mode, FBQ
Display LCD 128 x 32, blue, backlit LCD 128 x 32, blue, backlit LCD 128 x 32, blue, backlit
Delay 0 - 300 ms 0 - 300 ms 0 - 300 ms
Equalisation
High and low shelving EQ
2 x parametric EQ
High and low shelving EQ
2 x parametric EQ
High and low shelving EQ
2 x parametric EQ
Limiter Zero attack input limiter Zero attack input limiter Zero attack input limiter
Presets
20 total presets,
19 user-denable
20 total presets,
19 user-denable
20 total presets,
19 user-denable
Crossover High pass L-R 24 dB/oct High pass L-R 24 dB/oct High pass L-R 24 dB/oct
Protection Lock-out function for allsettings Lock-out function for allsettings Lock-out function for allsettings
Ultranet Digital Network
Digital processing
A/D conversion 24-bit,44.1/48 kHz sample rate 24-bit,44.1/48 kHz sample rate 24-bit,44.1/48 kHz sample rate
Converter type 24-bit,delta-sigma 24-bit,delta-sigma 24-bit,delta-sigma
System
Signal 16 channels 16 channels 16 channels
Latency < 0.9 ms < 0.9 ms < 0.9 ms
Frequency response 20 Hz to 20 kHz (+0 / -3 dB) 20 Hz to 20 kHz (+0 / -3 dB) 20 Hz to 20 kHz (+0 / -3 dB)
Dynamic range Typical 92 dB Typical 92 dB Typical 92 dB
Cabling
Cables Shielded CAT5 Shielded CAT5 Shielded CAT5
Cable length Max. 246 ft / 75 m recommended Max. 246 ft / 75 m recommended Max. 246 ft / 75 m recommended
TSP122-AN TSP152-AN TSP118B-AN
Power Supply
Power consumption
90 W @ ⁄ max power 90 W @ ⁄ max power 180 W @ ⁄ max power
Voltage (fuses)
USA / Canada 120 V~, 60 Hz (T 15 A H 250 V) 120 V~, 60 Hz (T 15 A H 250 V) 120 V~, 60 Hz (T 15 A H 250 V)
UK / Australia / Europe
220-240 V~, 50/60 Hz
(T 10 A H 250 V)
220-240 V~, 50/60 Hz
(T 10 A H 250 V)
220-240 V~, 50/60 Hz
(T 10 A H 250 V)
Korea / China
220-240 V~, 50/60 Hz
(T 10 A H 250 V)
220-240 V~, 50/60 Hz
(T 10 A H 250 V)
220-240 V~, 50/60 Hz
(T 10 A H 250 V)
Japan
100 V~, 50/60 Hz
(T 15 A H 250 V)
100 V~, 50/60 Hz
(T 15 A H 250 V)
100 V~, 50/60 Hz
(T 15 A H 250 V)
Enclosure
Dimensions (HWD)
613 x 384 x 340 mm
(24.1 x 15.1 x 13.3")
717 x 443 x 360 mm
(28.2 x 17.4 x 14.1")
693x 523 x 725 mm
(27.2 x 20.5 x 28.5")
Net weight 21.5 kg (61.2 lbs) 27 kg (61.2 lbs) 46.3 kg (61.2 lbs)
Construction
18 mm (¾") birch plywood 18 mm (¾") birch plywood 18 mm (¾") birch plywood
Finish Semi matt black paint Semi matt black paint Semi matt black paint
Grille Powder coated perforatedsteel Powder coated perforatedsteel Powder coated perforatedsteel
Flying hardware M10 x 6 points M10 x 6 points
Accessories
TSP122-PC protective cover for TSP122 TSP152-PC protective cover for TSP152 TSP118B-PC protective cover for TSP118B
*independent of limiters and driver protection circuits
†Only qualied personnel are allowed to modify the AC-Main cord and to adhere to all applicable national standards.