Instruction Manual

INSTRUCTIONS FOR USE

Preparation before brewing tea
Preparation for the first use of the machine (machine cleaning)
WARNING: Make sure that the connected power supply is suitable for the machine, otherwise the
machine may be damaged.
1.Open the water tank lid
2.Add in certain volume
water, and don’t water
should not over the “MAX”
level marking on tank
3.Close the tank lid
4.Filter holder match the UN-
LOCK symbol and turn it
clockwise to lock it on
5.After you locked well, the
allow on filter holder handle
should perfect match LOCK
symbol
6. Put back the S.S mug on
tray
7. Make sure the voltage is match with
product’s rated voltage, then plug in
switch
Coffee powder brewing switch
8. Press “ON/OFF” button, machine under
standby mode, and then press “Coffee powder
button” to let machine start heating，let hot
water flow through the inside tube and also
washing the filter holder and final the mug; while
finished 1 cycle, machine buzzer will have 3
times B-B-B warning, then 1
st
cleaning step
finished, you can start to prepare your fresh
coffee; if needed, can repeat this 2-3 times to
make sure whole machine was well cleaned