Instruction Manual

GRIND & BREWING OPERATION
ATTENTION：
1. There is safety micro switch on this machine, user need to make sure on above STEP 5,
filter holder should be assembled well, otherwise machine will not start;
2. When machine was well assembled, after plug in the machine will have B sound reminder
to confirm it was well connected with electricity, and ON/OFF button will light on in the
mean time;
3. Always checked if the filter holder was assembled well and mind the gap between filter
holder and housing is perfect or not before each brewing
1.Open the water tank lid
2.Add in certain volume water,
and don’t water should not over
the “MAX” level marking on
tank
3.Close the tank lid
4. Make sure filter was
well placed in filter holder
5.Use the spoon to add in
certain coffee bean you
need (3-4 Spoon)
6. Well placed the grinder
blade inside filter holder
7. Filter holder match the UN-
L
O
C
K
b
l
d
t
i
t
8. After you locked well, the
a
l
l
o
w
o
n
f
i
l
t
e
r
h
o
l
d
e
r
h
a
n
d
l
e
9. Put back the S.S mug on
t
r
a
y