TURBO MANUAL ELECTRIC FIREPLACE [elrlciig Sell ae l LR lel) IMPORTANT HEAD ALL INSTRUCTIONS BEFORE USING Your ELECTRIC FIREPLACE.
NAVE THESE INSTRUCTIONS FOR FUTURE USE Warranty Registration Thank you for purchasing a TURBO Electric Fireplace! We're extremely happy that you have decided to join us. To thank you we're giving you a warranty extension. All you need fo do is register your new product at waitperson Once it's registered, you'll get a 1-year extension on the 1-year manufacturer warranty for a total of 2 years.
NAVE THESE INSTRUCTIONS FOR FUTURE USE Safety Instructions % To prevent possible fires, do not bio air intakes or exhausts in any manner. Do not use on soft surfaces, like a bed, where the opening may be blocked. ® The fireplace has hoi, sparking, and arcing pairs Inside. Do riot usa i In areas where gasoline, paint, or flammable Woulds are used or stored. This appliance should not be used as a drying rack for clothing. # Usa this appliances only as described in this manual.
NAVE THESE INSTRUCTIONS FOR FUTURE USE Control Panel © LCD Screen ©) Indicators © Timer O Heater ON/OFF © Flame Control © Main Power # Crass the main power bunion (6) to turn on the fireplace. 4. LCD Serene: Displays information about the settings you are using. 2. indicator Lights: There are 3 indicator lights below the LOD screen -red, green, and blue. a. Red Indicates that the LCD screen Is displaying the temperature in digress Fahrenheit. b.
NAVE THESE INSTRUCTIONS FOR FUTURE USE Control Panel ep ea 1 16°C 1 62°F 2 17°C 2 63°F 3 18°C 3 64°F 6 21°C 1 72°F 7 22°C 12 73°F 8 23°C 13 74°F 1 26°C 20 81°F 12 27°C 21 82°F switch from Fahrenheit to Celsius (or vice versa) press and hold the main power button for § seconds. The LOD screen will flash 2 times to confirm your settings. USING THE FLAME CONTROL Crass the flame control button to cycle through the flame colors. The default flame color is L1 {Red) after powering on.
NAVE THESE INSTRUCTIONS FOR FUTURE USE Control Panel USING THE REMOTE CONTROL The remits control can be suds up to 13 fest (4 meters) away from the heater, 50 long as their ans no obstructions between the remits control and the heater. Thermostat Control +— Power Button up +—Flame Control DOWN +— Timer Setting Remote control receiver REMOTE CONTROL BATTERIES Tress and slide the battery cover on the rear of the remote and remove the cover. Insert two new AAA 1.5V batteries into the battery compartment.
NAVE THESE INSTRUCTIONS FOR FUTURE UBE FCC Information # Connect the equipment into an outlet on a circuit different from that fo which the receiver is connected, @ Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 16 of the FCC Rules. Operation is subject to the following two conditions: {1}. This device may not cause harmful interference, and {2}. This device must ace apt any interact received, including interference that may cause undesired operation.
NAVE THESE INSTRUCTIONS FOR FUTURE USE Troubleshooting apn Possible Cause(s) [ogy Ta Power lights ON but the flame affect is net visible #The fireplace is not operating correctly. ® Contact customer service. Excessive noise when ihe fireplace is operating #The fan is defective. @ Contact customer service. e The fireplace assembly is defective.
