USER WN FYE SES) [ FIREPLACE INSERT model NO: INFINITUDE IMPORTANT LEAF ALL INSTRUCTIONS BEFORE USING v Out ELECTRIC FIREPLACE, FAILURE TO FOLLOW INSTRUCTIONS MAY LEAD TO DAMAGE TO THE MACHINE OR PERSONAL JURY.
SAVE THESE INSTRUCTIONS FOR FUTURE USE LEU TAR Thank you for purchasing a TURBO Electric Fireplace! We're extremely happy that you have decided to join us. To thank you we're giving you a warranty extension. All you need to do is register your new product at Once it's registered, you'll get a 1-year extension on the 1-year manufacturer warranty for a total of 2 years.
SAVE THESE INSTRUCTIONS FOR FUTURE USE # To prevent possible fires, do not block air intakes or exhausts in any manner. Do not use on soft surfaces, like a bed, whets the opening may be blocked. ® The fireplace has het, sparking, and arcing parts Inside. Do not use It In areas where gasoline, paint, or flammable liquids are used or stored. This appliance should not be used as a drying rack for clothing. # Use this appliance only as described in this manual.
SAVE THESE INSTRUCTIONS FOR FUTURE USE This product must be grounded. If the heater should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all Fiscal codes and ordinances.
SAVE THESE INSTRUCTIONS FOR FUTURE USE Overheating Protection This heater has an overheating protection cutoff that switches the appliance off automatically if it overheats. #Obstruction of the rear air intakes or front grill may result in overheating. If this occurs, please disconnect the heater from the power socket and allow It to cool for 10-15 minutes before powering It on again.
SAVE THESE INSTRUCTIONS FOR FUTURE USE Part Description Quantity A Fireplace spec B Wall Anchor py.
SAVE THESE INSTRUCTIONS FOR FUTURE USE Installation INSTALLATION WARNINGS #The fireplace is heavy and should be assembled near its desired location. # tls recommended that two people move the fully-assembled fireplace to prevent Injury. Keep combustible materials such as furniture, bedding, papers, clothes, and curtains at least 3 ft away from the fireplace air outset.
SAVE THESE INSTRUCTIONS FOR FUTURE USE Installation ASSEMBLY INSTRUCTIONS 1. Before installation, please confirm the position to install the fireplace and make 2 marks on the wall for per-drill holes. The two holes should be 11.61 inch (295 mm) apart. 2. Drill 2 holes In the wall and Insert the self-drilling wall anchors then the fillips-head screw (C). 3. Mount the unit (A) on the wall.
SAVE THESE INSTRUCTIONS FOR FUTURE USE Sow © oro Polio ome, a power BUTTON @ Touch this button to power on the fireplace. Please note that the panel will not make any sound after touching any button. In the default setting, the flame Is orange. ® Touch the power button to tum off the fireplace. This machine remembers all the settings (except the timer setting) and recovers those settings when you power on the fireplace next time (Only if you never pull the plug).
SAVE THESE INSTRUCTIONS FOR FUTURE USE D. J HEATER / THERMOSTAT CONTROL @ Touch the heater button to switch the temperature setting. See the table for detailed temperature settings Instruction. The default temperature setting Is 72°F. @ Press and hold the heater button for 10 seconds to switch between Fahrenheit (°F) and Celsius (°C) display. Nita: The heater will automatically pause after reaching the set temperatures in your room.
SAVE THESE INSTRUCTIONS FOR FUTURE USE DISPOSAL OF USED BATTERIES Battery may contain hazardous substances which could endanger the environment and human health. This symbol marked on the battery and/ or packaging indicates that used battery shall not be treated as municipal waste. Batteries should be disposed of at an appropriate collection point for recycling.
SAVE THESE INSTRUCTIONS FOR FUTURE USE Troubleshooting Customer Support: support @turboprop [TA] Possible Cause(s) [e100 YA #The fireplace is not plugged in. # Make sure the fireplaces is plugged into a standard 120V outlet. @A circuit breaker is ripped or a fuse is blown, # Check additional appliances on the circulate. Ideally, the fireplace should be on a dedicated 15-amp circuit. The fireplace ® The vents are direly or clogged. Unplug the unit. Clear the vent area of dust and debris.
SAVE THESE INSTRUCTIONS FOR FUTURE USE Warranty Information TURBO provides a 1-year limited warranty for TURBO Heater, from the date of purchase, subject to the following conditions and limitations outlined below. WHAT IS COVERED? ® This warranty Is limited to the repair or replacement of part(s) proved to be defective In material or workmanship, after sad defect is confirmed by the manufacturer's inspection.
