SAVE THESE INSTRUCTIONS FOR FUTURE USE LEU TAR Thank you for purchasing a TURBO Electric Fireplace! We're extremely happy that you have decided to Join us. To thank you we're giving you a warranty extension. All you need to do is register your new product at Once it's registered, you'll get a 1-year extension on the 1-year manufacturer warranty for a total of 2 years.
SAVE THESE INSTRUCTIONS FOR FUTURE USE # To prevent possible fires, do not block air intakes or exhausts in any manner. Do not use on soft surfaces, like a bed, whets the opening may be blocked. ® The fireplace has het, sparking, and arcing parts Inside. Do not use It In areas where gasoline, paint, or flammable liquids are used or stored. This appliance should not be used as a drying rack for clothing. # Use this appliance only as described in this manual.
SAVE THESE INSTRUCTIONS FOR FUTURE USE This product must be grounded. If the heater should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all Fiscal codes and ordinances.
SAVE THESE INSTRUCTIONS FOR FUTURE USE Overheating Protection This heater has an overheating protection cutoff that switches the appliance off automatically if it overheats. ®Obstruction of the rear alr Intakes or front grill may result In overheating. If this occurs, please disconnect the heater from the power socket and allow It to cool for 10-15 minutes before powering It on again. ® Should problems persist, please contact TURBO customer service team via [LRT 110-120V / 60Hz Rated Current 12.
SAVE THESE INSTRUCTIONS FOR FUTURE USE s List 3 2508 EEO T— obs 0, seat CREE = EoD Part Description Quantity Lc ET [-1ST, 7 A Electric Firebox 1 6 Table Top Support 2 B Glass Front 1 H Deflector 1 c Mounting Bracket (attached 1 1 Front 1 fo the Firebox A} J [Table Top Base 1 D Acrylic Crystals 1 K Remotes Control 1 E Cobblestone 1 Log Set 1 Note: Both table top supports are Identical.
SAVE THESE INSTRUCTIONS FOR FUTURE USE [149 AA Small Screw 12 BB Large Screw 2 cc Wall Anchor 2 Install at INSTALLATION WARNINGS # The fireplace is heavy and should be assembled near its desired location. It is recommended that two people move the fully-assembled fireplace to prevent injury. ® Keep combustible materials such as furniture, bedding, papers, clothes, and curtains at least 3 ft away from the fireplace.
SAVE THESE INSTRUCTIONS FOR FUTURE USE Installation INSTALLATION LOCATION The fireplace should be located in an area that is not in direct sunlight, not susceptible to moisture, and away from any insulated exterior walls. TOOLS REQUIRED quickly finish assembly. ASSEMBLY INSTRUCTIONS A. Mounting on a Wall 1 Positioning the mounting bracket Choose a solid wall. Place the mounting bracket (C) where the electric fireplace installed, and ensure that the mounting bracket (C) is level.
SAVE THESE INSTRUCTIONS FOR FUTURE USE Installation 3 Hanging the electric fireplace Hang the electric fireplace (A) on the mounting bracket (C). 4 Inserting the ember bed Arrange the ember beds (acrylic crystals [D] pebbles [E] or log set [F]} along the inset window ledge at the front of the electric fireplace (A). ma 5 Installing the glass panel NOTE: This glass front is heavy. It is recommended that 2 people to fulfill the assembly at this step to prevent damage.
SAVE THESE INSTRUCTIONS FOR FUTURE USE Installation 2 Securing the mounting bracket Use a screwdriver to secure the mounting bracket {C) to the table top stand with 2 small screws (AA) 4 Inserting the ember bed Arrange the ember beds (acrylic crystals [D] pebbles [E] or log set [F]) along the inset window ledge at the front of the electric fireplace (A). § Installing the glass panel NOTE: This glass front Is heavy. It Is recommended that 2 people to fulfill the assembly at this step to prevent damage.
SAVE THESE INSTRUCTIONS FOR FUTURE USE USING THE CONTROL PANEL AND REMOTE CONTROL On the top-right side of the electric fireplace (A) is the control panel. The buttons on the control panel and the remote function in the same way. Digital Display Screen DH & Power ON / OFF Temperature Down QO®) Temperature Up Thermostat Control Flame Control @ Timer Ember Bed Control @ = Background Light Child Lock SS POWER BUTTON «Press the power button once to power on. Press the power button to power off.
SAVE THESE INSTRUCTIONS FOR FUTURE USE @ EMBER BED CONTROL #Press the ember bed control button once to light up the ember bed. *Press again to cycle through different colors. See the table for more information. Button Press 2 3 5 Ember bed! Red Blue | Greenlandic Log set Orange Green Blu Red (Mix to Purple) | (Mix to White} Cycle Display THERMOSTAT CONTROL e Press the thermostat button once tums the heater on.
SAVE THESE INSTRUCTIONS FOR FUTURE USE “¥ BACKGROUND LIGHT #Press background light button to tum on the ambient lighting on the side of the fireplace. Press the button repeatedly to cycle through the background light color settings. See the table for detailed information. at Press Blue 2nd Press Red 3rd Press Cybele 4th Press Off TIMER (1 HOUR 8 HOURS) Press the timer button to control the time of the flame and / or heater function.
SAVE THESE INSTRUCTIONS FOR FUTURE USE INSERTING BATTERIES IN THE REMOTE Press and glide the battery cover on the rear of the remote, remove the cover. Insert two new R03 “AAA” 1.5V batteries Into the battery compartment. Make sure the polarity Is correct. Battery Is not Included In the packages because of transportation safety. DISPOSAL OF USED BATTERIES Battery may contain hazardous substances which could endanger the environment and human health.
SAVE THESE INSTRUCTIONS FOR FUTURE USE ® Ways tum the fireplace OFF and unplug the power cord from the outset before cleaning. # Use a vacuum or duster to remove dust and dirt from the fireplace and vent areas. #Clean with a soft, damp cloth and buff with a dry cloth to maintain the luster of this product. # Never use abrasive cleaners, liquid sprays, or any cleaner that could scratch the surface of the appliance.
SAVE THESE INSTRUCTIONS FOR FUTURE USE rant Information TURBO provides a 1-year limited warranty for TURBO Heater, from the date of purchase, subject to the following conditions and limitations outlined below. WHAT IS COVERED? ® This warranty is limited to the repair or replacement of part(s) proved to be defective in material or workmanship, after said defect is confirmed by the manufacturer's inspection.
