Installation Guide

07
5. Reinstall the junction box back.
6. Save the power cord.
4. Insert the White wire to the designated N Terminal and tighten the screw.
Insert the Green or bare copper wire to the designated G Terminal and tighten the screw.
Insert the Black wire to the designated L Terminal and tighten the screw.
Make sure all connections are tightened properly.
3. Use pliers to take the wire clip off and remove the power cord.
WHITE/BLANC (N)
BLACK/NOIR (L)
GREEN/VERT (G)
WHITE/BLANC (N)
BLACK/NOIR (L)
GREEN/VERT (G)
FIREPLACE JUNCTION
POWER SUPPLY