Installation Guide

A. Recessed Installation
• Due to many different finish materials used on walls, it is highly recommended that you consult a local builder before
you install this fireplace in the wall.
• In order to avoid the possibility of exposed insulation or vapor barrier coming in contact with the fireplace, it is
recommended that the walls of the fireplace enclosure be “finished” (Sheetrock, drywall, etc) as you would finish any
other wall of your home. This will ensure that clearance to combustibles is maintained within the wall cavity.
• Never install the fireplace into load-bearing walls. When recessing fireplace in a wall, recess into non-load bearing
walls ONLY!
1. Choose a location in the wall to install fireplace.
2. Create opening in the wall that is no more than ¼” larger than metal firebox portion of fireplace. And create a rough-in
with electrical supply, the electrical junction box is located on the left side, at the back of the appliance.
Confirm the location before recessed fireplace
09
NOTE:
• Before installing the fireplace, please plug fireplace into approved outlet and power on, test the fireplace to make sure
that it operates properly.
• Do not install the glass panel when testing.
• If you have any problems about installation, please contact support team at [e-mail].
Side View (Wall Mount )
8" (203mm)
6" (152mm)
6" (152mm)
Mantel
Floor
Wall
Side View (recessed into a wall)
8" (203mm)
0"
Mantel
Floor