Installation Guide

3. Insert Wall Anchors (AA) to drilled holes, then insert

Large Screws (BB) into the Wall Anchor (AA) with

an electric drill or screwdriver.

Note: Wall Anchors (AA) are not required if you are

installing the fireplace directly to studs. It is recommended

to install the mounting brackets to at least one stud if

possible.

WALL

Note: Do not fasten the Large Screws (BB) tightly. Leave 1/4”(6mm) spacing to hang up the Firebox.

1/4" (6mm)

2. Fix the Mounting Brackets at both sides of firebox by 6 Small Screws (CC) as shown.

Note: The hook hole of the Mounting Bracket is on the back.