Installation Guide

• Press and hold the Flame Button for 3s and enter the Flame Brightness mode. The Flame Button will flash. Press
again to cycle through different brightness settings of the flame. See the table below for more detailed information.
• No operation within 10 seconds to exit the Flame Brightness mode.
18
Ember Bed Button
• Press to active the Ember Bed Color mode.
• Press again to cycle through different colors of the carbon. See the table for more detailed information.
Display Value
b5
b4
b3
b2
b1
Brightness
Level 5
Level 4
Level 3
Level 2
Level 1
Display Value
H01
H02
H03
H04
H05
H06
H07
H08
H09
H10
H11
H12
H13
OFF
Flame Color
White
Red
Orange
Green 1
Green 2
Green 3
Blue 1
Blue 2
Blue 3
Purple 1
Purple 2
Purple 3
Gradient
OFF